W25X40CLSNIG Overview
Its memory type can be classified as Non-Volatile. It is supplied votage within Tube. Embedded in the 8-SOIC (0.154, 3.90mm Width) case, memory ics is a single file. It is estimated that the memory size on the chip is 4Mb 512K x 8. This device uses a FLASH-format memory, which is of mainstream design. Due to its wide operating temperature range, this device can be used in a wide variety of demanding applications. A supply voltage of 2.3V~3.6V can be applied to it. It is recommended that the mounting type be Surface Mount. The chip has 8 terminations. The part supports at least 1 functions to ensure a comprehensive working process. The memory device is designed to be supplied with an 3V volt power supply in order to operate properly. In order to operate effectively, the memory rotates at a clock frequency within a range of 104MHz. The memory device is enclosed in a package with an 8-pin connector. The memory device has 8 pins, which means that it has 8 memory locations, which indicates it is an 8-bit device. It uses Surface Mount mounting, which is an efficient, straightforward mounting method. As far as its nominal supply current is concerned, this memory component carries a rating of 14mA. This memory chip requires only 2.5/3.3V of power. In its target applications, this memory ics plays an important role as a member of the SpiFlash? series of memory devices. Integrated into this memory is a SPI-type serial bus that facilitates data transmission to the CPU. It is necessary to apply 2.7V programming voltage to certain nonvolatile memory arrays in order to change their state.
W25X40CLSNIG Features
Package / Case: 8-SOIC (0.154, 3.90mm Width)
8 Pins
W25X40CLSNIG Applications
There are a lot of Winbond Electronics W25X40CLSNIG Memory applications.
- cell phones
- workstations,
- eSRAM
- personal computers
- nonvolatile BIOS memory
- mainframes
- data buffer
- eDRAM
- hard disk drive (HDD)
- networking
