DG9421DV-T1-E3 Overview
The electronic component is convenient to ship overseas because it is packed in a SOT-23-6 Thin, TSOT-23-6. The advanced packaging method Tape & Reel (TR) provides high reliability. It is mounted in the position Surface Mount. 1:1 is the ratio between multiplexers and demultiplexers. The operating temperature is extended to around -40°C~85°C TA. The total number of terminations is 6. As a result of its 1 channels, this electronic component provides high-quality output. An 5V voltage supply should allow the electrical part to be turned on and run. A total of 6 pins are injected into the body of the electronic part. Based on SPST - NC switching circuits, these analog multiplexers work. Use DG9421 to search for variants of the digital switches. The internal resistance of this digital multiplexer is 3Ohm. Datasheets for functions of 6 pins are available. Multiplexer or Switches is a typical switch device. normally, users should not supply switches with voltages higher than 12V. Analogue multiplexer with a Dual, Single supply type that is cost-effective. A low voltage of 2.7V should be applied to the electronic component. This multiplexer would work with -1μA current. If you put voltage higher than 1μA on the digital multiplexer, damage may occur. For this multiplexer, dual supply voltage is feasible, but it should not exceed 6V. A dual power supply should have at least 2.7V voltage attached. A voltage of 5V can be used to operate the electronic component. A 1 input needs to be operated. There is 3Ohm resistance between the Drain and Source on this part.
DG9421DV-T1-E3 Features
1 Channels
Switch Circuit: SPST - NC
-1μA Supply Current
Drain-to-Source resistance: 3Ohm
DG9421DV-T1-E3 Applications
There are a lot of Vishay Siliconix
DG9421DV-T1-E3 Analog Switches & Multiplexers ICs applications.
- Low-Voltage
- Isolation
- Medical
- Imaging
- Ultrasound
- Audio and video switching
- Automatic test equipment
- Precision data acquisition
- Battery-powered systems
- Sample-and-hold systems
