DG2038DQ-T1-E3 Overview
Shipping overseas is convenient due to the electrical component's packing in 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad. This packaging method provides high reliability because it uses advanced packaging techniques. Multiplexers like this are mounted in the Surface Mount position. Multiplexers and demultiplexers have a number of circuits 1:1. Operational temperature extended around -40°C~85°C TA. 8 terminations have been made so far. Multiplexers built on a SPST - NO switching circuit are built. Try searching for the analog switch ic with DG2038 if you are looking for variants. As far as internal resistance is concerned, it has 5Ohm. To find out what the functions of 8 pins are, please refer to their datasheets. In this analog multiplexer, the value is Multiplexer or Switches. Users shouldn't supply more than 5.5V voltage to the switch device. An effective Single supply digital multiplexer. It is recommended that the electrical component receives a voltage of 1.8V. This digital switch can be operated with a current of 20nA. This analogue multiplexer requires a voltage of 1.8V~5.5V when it drains from a single voltage supply. Put voltage above 1μA on the multiplexer to cause damage. A DPDT analog IC is integrated into the board. In this switch multiplexer, there are SEPARATE OUTPUT outputs available. The 2 inputs need to be operated in order to work. There is 2.5Ohm resistance between Drain and Source for this electronic part.
DG2038DQ-T1-E3 Features
Switch Circuit: SPST - NO
20nA Supply Current
Drain-to-Source resistance: 2.5Ohm
DG2038DQ-T1-E3 Applications
There are a lot of Vishay Siliconix
DG2038DQ-T1-E3 Analog Switches & Multiplexers ICs applications.
- Automatic test equipment
- Precision data acquisition
- Battery-powered systems
- Sample-and-hold systems
- Communication systems
- Data Acquisition Systems
- Relay Replacement
- Battery Powered Systems
- Existing multiplexer applications (both fault-protected and nonfault-protected)
- New designs requiring multiplexer functions
