DG612DJ-E3 Overview
As the electronic part is packed in 16-DIP (0.300, 7.62mm), international shipping is convenient. A high level of reliability can be achieved through the use of an advanced packaging method Tube. The multiplexer is located in Through Hole. 1:1 is the number of circuits in the multiplexer and demultiplexer. Operating temperature extended to -40°C~85°C TA. The electronic part provides high-quality output because it has 4 channels. Circuits based on SPST - NO switching are used to construct these analog switch ics. There are 4 circuits in this switch device. Try searching with DG612 to find analog multiplexer variants. An switch multiplexer with 45Ohm internal resistance has a value of 45Ohm. Datasheets for 16 pin functions are available upon request. Multiplexers should not be powered above 18V in normal situations. The analog switch ic is of the Dual, Single supply type and is cost-effective. The lowest voltage the electronic part should receive is 10V. An operating current of -1μA would be sufficient for this switch device. When the digital multiplexer is charged above 1μA, damage can occur. Despite this switch device's dual supply capability, its voltage should not exceed 15V. It is recommended that you attach at least 10V to your dual power supply. Operating the 4 inputs requires 4 inputs. Temperatures above 85°C degrees Celsius should not be operated by the multiplexer. A analog switch ics with 4 outputs is included. Suppliers offer a package with 16-PDIP.
DG612DJ-E3 Features
4 Channels
Switch Circuit: SPST - NO
-1μA Supply Current
-3db Bandwidth: 500MHz
DG612DJ-E3 Applications
There are a lot of Vishay Siliconix
DG612DJ-E3 Analog Switches & Multiplexers ICs applications.
- Imaging
- Ultrasound
- Audio and video switching
- Automatic test equipment
- Precision data acquisition
- Battery-powered systems
- Sample-and-hold systems
- Communication systems
- Data Acquisition Systems
- Relay Replacement
