Name: DG613AEN-T1-E4
Brand: Vishay Siliconix
SKU: DG613AEN-T1-E4
Availability: InStock

Technical Specifications

Parameter Name	Value
Type	Parameter
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	16-WFQFN
Number of Pins	16
Supplier Device Package	16-miniQFN (1.8x2.6)
Operating Temperature	-40°C~125°C TA
Packaging	Tape & Reel (TR)
Published	2016
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Resistance	72Ohm
Max Operating Temperature	125°C
Min Operating Temperature	-40°C
Max Power Dissipation	525mW
Base Part Number	DG613
Number of Outputs	4
Number of Channels	4
Number of Circuits	4
Max Supply Voltage	12V
Min Supply Voltage	2.7V
Operating Supply Current	1μA
Power Dissipation	525mW
Max Supply Current	100μA
Throw Configuration	SPST
Turn On Delay Time	55 ns
Number of Inputs	4
Voltage - Supply, Single/Dual (±)	2.7V~12V ±2.7V~5V
Supply Type	Dual, Single
Turn-Off Delay Time	35 ns
Max Dual Supply Voltage	5V
-3db Bandwidth	720MHz
On-State Resistance (Max)	115Ohm
Min Dual Supply Voltage	2.7V
Multiplexer/Demultiplexer Circuit	1:1
Current - Leakage (IS(off)) (Max)	100pA
Channel Capacitance (CS(off), CD(off))	2pF 3pF
Switch Circuit	SPST - NO/NC
Switch Time (Ton, Toff) (Max)	55ns, 35ns
Charge Injection	1pC
Channel-to-Channel Matching (ΔRon)	700mOhm
Crosstalk	-90dB @ 10MHz
Height	750μm
Length	2.6mm
Width	1.8mm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant

DG613AEN-T1-E4 Product Details

DG613AEN-T1-E4 Overview

Shipping overseas is convenient due to the electrical component's packing in 16-WFQFN. To ensure high reliability, a new packaging method Tape & Reel (TR) is used. In Surface Mount, this analog switch is mounted. 1:1 is the number of circuits in the multiplexer and demultiplexer. Operational temperature extended around -40°C~125°C TA. A electrical component with 4 channels is capable of high-quality output. On the other hand, analog switches can be constructed using SPST - NO/NC switching circuits. This multiplexer is composed of 4 circuits. Look for analog switch ic variants by searching with DG613. Analog switches have 72Ohm internal resistance. Please refer to the datasheets for 16 pins functions. normally, users should not supply switches with voltages higher than 12V. The analog switch ic is of the Dual, Single supply type and is cost-effective. The lowest voltage the electronic part should receive is 2.7V. An operating current of 1μA would be sufficient for this switch device. When the digital multiplexer is charged above 100μA, damage can occur. For this switch, a dual supply voltage is feasible, but it must not exceed 5VIn the case of dual power supplies, you should connect at least 2.7V. Operating the 4 inputs requires 4 inputs. During operation, the multiplexer should not be exposed to a temperature above 125°C. In this digital multiplexer, there are 4 outputs. It is offered by suppliers in package 16-miniQFN (1.8x2.6).