Name: 74HCT4052DB,118
Brand: Nexperia USA Inc.
SKU: 74HCT4052DB,118
Availability: InStock

new-10%

74HCT4052DB,118

Manufacturer part number:74HCT4052DB,118

Manufacturer:Nexperia USA Inc.

Description:60ns, 48ns SP4T 150Ohm Analog Switches 74HCT4052 16 Pins 2μA 4.5V 16-SSOP (0.209, 5.30mm Width)

Case Package:SOT-23

Datasheet:74HCT4052DB,118 Datasheet PDF

RoHs Status:non-compliant

Parameter Name	Value
Type	Parameter
Factory Lead Time	13 Weeks
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	16-SSOP (0.209, 5.30mm Width)
Number of Pins	16
Weight	130.010913mg
Operating Temperature	-40°C~125°C TA
Packaging	Tape & Reel (TR)
Published	2010
JESD-609 Code	e4
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
Resistance	150Ohm
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Max Power Dissipation	500mW
Technology	CMOS
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	4.5V
Terminal Pitch	0.65mm
Time@Peak Reflow Temperature-Max (s)	30
Base Part Number	74HCT4052
Pin Count	16
Operating Supply Voltage	5V
Number of Channels	8
Number of Circuits	2
Max Supply Voltage	5.5V
Min Supply Voltage	4.5V
Analog IC - Other Type	DIFFERENTIAL MULTIPLEXER
Operating Supply Current	320μA
Power Dissipation	500mW
Max Supply Current	160μA
Propagation Delay	18 ns
Turn On Delay Time	105 ns
Logic Function	Demultiplexer, Multiplexer
Max Input Voltage	5V
Voltage - Supply, Single/Dual (±)	4.5V~5.5V ±1V~5V
Supply Type	Dual, Single
Bandwidth	180MHz
Neg Supply Voltage-Nom (Vsup)	-4.5V
Turn-Off Delay Time	75 ns
Max Dual Supply Voltage	5V
On-State Resistance (Max)	150Ohm
Min Dual Supply Voltage	1V
Dual Supply Voltage	2.5V
Multiplexer/Demultiplexer Circuit	4:1
Off-state Isolation-Nom	50 dB
Current - Leakage (IS(off)) (Max)	2μA
Channel Capacitance (CS(off), CD(off))	3.5pF
On-state Resistance Match-Nom	6Ohm
Switch Circuit	SP4T
Switch Time (Ton, Toff) (Max)	60ns, 48ns
Channel-to-Channel Matching (ΔRon)	6 Ω
Crosstalk	-60dB @ 1MHz
Switch-off Time-Max	57ns
Radiation Hardening	No
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

74HCT4052DB,118 Product Details

74HCT4052DB,118 Overview

Presented in 16-SSOP (0.209, 5.30mm Width), this electrical component is convenient for overseas shipping. In order to provide high reliability, an advanced packaging method Tape & Reel (TR) is used. Surface Mount is where this multiplexer is located. 4:1 is the ratio between multiplexers and demultiplexers. Operating temperature around -40°C~125°C TA extended. Totally, there are 16 terminations. As a result of its 8 channels, this electronic component provides high-quality output. It is safe to turn on and run the electronic component with a 4.5V voltage supply. This electronic part can be found in the 16 series. These analog multiplexers are built based on SP4T switching circuits. The multiplexer consists of 2 circuits. Look for analog switch ic variants by searching with 74HCT4052. Internally, this switch multiplexer has a resistance of 150Ohm. The datasheets for the 16 pins explain the functions. Users shouldn't supply more than 5.5V voltage to the switch device. A analog switch ic that has a cost-effective Dual, Single supply type. A low voltage of 4.5V should be applied to the electronic component. It would be sufficient to run this analogue multiplexer with 320μA current. It may damage the digital multiplexer if the voltage is higher than 160μA. Dual supply volatge is feasible for this multiplexer. But it should not go beyond 5V. You should attach at least 1V voltage if you are using dual power supply. There is an integrated analog IC DIFFERENTIAL MULTIPLEXER in the module. A voltage of 5V can be used to operate the electronic component. There are various bandwidths available for data transfer.