DG469EY-T1-E3 Overview
The electronic part can be shipped overseas conveniently because it is packaged in 8-SOIC (0.154, 3.90mm Width). High reliability is provided by advanced packaging method Tape & Reel (TR). There is an analog multiplexer mounted in position Surface Mount. Multiplexers and demultiplexers have a ratio of 2:1. Operating temperature around -40°C~125°C TA extended. In total, 8 terminations have occurred. This electronic part offers high-quality output due to its 1 channels. It is safe to turn on and run the electronic component with a 15V voltage supply. A total of 8 pins are injected into the body of the electronic part. A SPDT switching circuit is used to build these analog multiplexers. Using the DG469 search parameter, you can discover variants of the switch. In this multiplexer, the internal resistance is 8Ohm. For functions related to 8 pins, please refer to the datasheets. Multiplexer or Switches is a typical switch device. Multiplexers should not be powered above 36V in normal situations. Digital switch that provides Dual, Single power at a cost-effective price. A low voltage of 12V should be applied to the electronic component. For this digital switch to work, 3μA current would suffice. A digital multiplexer may suffer damage if voltage is applied above 6μA. It is possible to supply this switch device with dual voltages. However, it is not advisable to exceed 22V. The voltage should be at least 4.5V if you are using dual power supplies. The electrical component supports 1 inputs. 2 outputs are included in the analogue multiplexer.
DG469EY-T1-E3 Features
1 Channels
Switch Circuit: SPDT
3μA Supply Current
DG469EY-T1-E3 Applications
There are a lot of Vishay Siliconix DG469EY-T1-E3 Analog Switches & Multiplexers ICs applications.
- SDH/SONET multiplexers
- Audio/video switches
- Central office
- Wireless Local Loop
- RGB switches
- DSUs
- Remote wireless modules
- Sample-and-hold systems
- MP3 players
- Short/Medium Loop: approximately 2000 ft. of 26 AWG and 5 REN loads
