Name: DG451EQ-T1-E3
Brand: Vishay Siliconix
SKU: DG451EQ-T1-E3
Price: 4.68000 USD
Availability: InStock

new-10%

DG451EQ-T1-E3

Manufacturer part number:DG451EQ-T1-E3

Manufacturer:Vishay Siliconix

Description:118ns, 97ns SPST - NC 5.3Ohm Analog Switches BREAK-BEFORE-MAKE DG451 16 Pins 500pA 5V 16-TSSOP (0.173, 4.40mm Width)

Case Package:SOT-23

Datasheet:DG451EQ-T1-E3 Datasheet PDF

RoHs Status:non-compliant

Parameter Name	Value
Type	Parameter
Factory Lead Time	15 Weeks
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	16-TSSOP (0.173, 4.40mm Width)
Number of Pins	16
Weight	172.98879mg
Operating Temperature	-40°C~125°C TA
Packaging	Tape & Reel (TR)
Published	2013
JESD-609 Code	e3
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
Termination	SMD/SMT
Resistance	5.3Ohm
Terminal Finish	MATTE TIN
Additional Feature	ALSO OPERATES WITH 12V SINGLE SUPPLY AND +/-15V DUAL SUPPLY
Subcategory	Multiplexer or Switches
Max Power Dissipation	450mW
Technology	CMOS
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	4
Supply Voltage	5V
Terminal Pitch	0.65mm
Time@Peak Reflow Temperature-Max (s)	40
Base Part Number	DG451
Output	SEPARATE OUTPUT
Pin Count	16
Number of Channels	1
Number of Circuits	4
Max Supply Voltage	36V
Min Supply Voltage	12V
Operating Supply Current	5μA
Power Dissipation	450mW
Max Supply Current	500nA
Throw Configuration	SPST
Turn On Delay Time	118 ns
Number of Inputs	4
Supply Type	Dual, Single
Neg Supply Voltage-Nom (Vsup)	-5V
Turn-Off Delay Time	97 ns
Max Dual Supply Voltage	22V
On-State Resistance (Max)	5.3Ohm
Min Dual Supply Voltage	5V
Dual Supply Voltage	15V
Multiplexer/Demultiplexer Circuit	1:1
Current - Leakage (IS(off)) (Max)	500pA
Channel Capacitance (CS(off), CD(off))	31pf 34pF
On-state Resistance Match-Nom	0.13Ohm
Switch Circuit	SPST - NC
Switch Time (Ton, Toff) (Max)	118ns, 97ns
Charge Injection	22pC
Channel-to-Channel Matching (ΔRon)	120m Ω
Crosstalk	-85dB @ 1MHz
Switching	BREAK-BEFORE-MAKE
Switch-on Time-Max	256ns
Switch-off Time-Max	113ns
Drain to Source Resistance	4Ohm
Normal Position	NC
Voltage - Supply, Dual (V±)	±5V~15V
Height	920μm
Length	5.08mm
Width	4.4mm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

DG451EQ-T1-E3 Product Details

DG451EQ-T1-E3 Overview

Presented in 16-TSSOP (0.173, 4.40mm Width), this electrical component is convenient for overseas shipping. High reliability is ensured by the advanced packaging method Tape & Reel (TR). Mounted in Surface Mount is this multiplexer. There is 1:1 ratio between the number of multiplexers and demultiplexers. Operating temperature around -40°C~125°C TA extended. Total terminations are 16. High-quality output is provided by the electronic component's 1 channels. It is safe to turn on and run the electronic component with a 5V voltage supply. There is an electrical component included in the 16 series. On the other hand, analog switches can be constructed using SPST - NC switching circuits. Circuits number 4 make up this analogue multiplexer. Use DG451 to search for variants of the digital switches. In this multiplexer, the internal resistance is 5.3Ohm. Please refer to the datasheets for 16 pins functions. A analogue multiplexer of this type is a Multiplexer or Switches. normally, users should not supply switches with voltages higher than 36V. An effective Dual, Single supply digital multiplexer. A low voltage of 12V should be applied to the electronic component. The analogue multiplexer could operate on 5μA current. The switch multiplexer may be damaged if it is exposed to voltage greater than 500nA. It is possible to supply this switch device with dual voltages. However, it is not advisable to exceed 22V. A dual power supply should have at least 5V voltage attached. The outputs of this digital multiplexer are SEPARATE OUTPUT in number. Operating 4 inputs is required. Additional features of the electronic component include: ALSO OPERATES WITH 12V SINGLE SUPPLY AND +/-15V DUAL SUPPLY. Resistivity from Drain to Source is 4Ohm for this electronic part.

DG451EQ-T1-E3 Features

1 Channels
Switch Circuit: SPST - NC
5μA Supply Current
Additional Features: ALSO OPERATES WITH 12V SINGLE SUPPLY AND +/-15V DUAL SUPPLY
Drain-to-Source resistance: 4Ohm