Name: DG453EQ-T1-E3
Brand: Vishay Siliconix
SKU: DG453EQ-T1-E3
Price: 4.68000 USD
Availability: InStock

new-10%

DG453EQ-T1-E3

Manufacturer part number:DG453EQ-T1-E3

Manufacturer:Vishay Siliconix

Description:118ns, 97ns SPST - NO/NC 5.3Ohm Analog Switches BREAK-BEFORE-MAKE DG453 16 Pins 500pA 5V 16-TSSOP (0.173, 4.40mm Width)

Case Package:SOT-23

Datasheet:DG453EQ-T1-E3 Datasheet PDF

RoHs Status:non-compliant

Parameter Name	Value
Type	Parameter
Factory Lead Time	15 Weeks
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	16-TSSOP (0.173, 4.40mm Width)
Number of Pins	16
Weight	172.98879mg
Operating Temperature	-40°C~125°C TA
Packaging	Tape & Reel (TR)
Published	2012
JESD-609 Code	e3
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
Resistance	7.3Ohm
Terminal Finish	MATTE TIN
Additional Feature	ALSO OPERATES WITH 12V SINGLE SUPPLY AND +/-15V DUAL SUPPLY
Subcategory	Multiplexer or Switches
Max Power Dissipation	450mW
Technology	CMOS
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	4
Supply Voltage	5V
Terminal Pitch	0.65mm
[email protected] Reflow Temperature-Max (s)	40
Base Part Number	DG453
Output	SEPARATE OUTPUT
Pin Count	16
Number of Channels	1
Number of Circuits	4
Max Supply Voltage	36V
Min Supply Voltage	12V
Operating Supply Current	5μA
Power Dissipation	450mW
Max Supply Current	500nA
Throw Configuration	SPST
Turn On Delay Time	118 ns
Number of Inputs	4
Supply Type	Dual, Single
Neg Supply Voltage-Nom (Vsup)	-5V
Turn-Off Delay Time	97 ns
Max Dual Supply Voltage	22V
On-State Resistance (Max)	5.3Ohm
Min Dual Supply Voltage	5V
Dual Supply Voltage	15V
Multiplexer/Demultiplexer Circuit	1:1
Current - Leakage (IS(off)) (Max)	500pA
Channel Capacitance (CS(off), CD(off))	31pf 34pF
On-state Resistance Match-Nom	0.13Ohm
Switch Circuit	SPST - NO/NC
Switch Time (Ton, Toff) (Max)	118ns, 97ns
Charge Injection	22pC
Channel-to-Channel Matching (ΔRon)	120m Ω
Crosstalk	-85dB @ 1MHz
Switching	BREAK-BEFORE-MAKE
Switch-on Time-Max	256ns
Switch-off Time-Max	113ns
Voltage - Supply, Dual (V±)	±5V~15V
Height	920μm
Length	5.08mm
Width	4.4mm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant

DG453EQ-T1-E3 Product Details

DG453EQ-T1-E3 Overview

Shipping overseas is convenient with the electronic component packed in 16-TSSOP (0.173, 4.40mm Width). Advanced packaging method Tape & Reel (TR) is used to provide high reliability. Mounted in Surface Mount is this multiplexer. Multiplexer and demultiplexer circuits have a number 1:1. Increasing operating temperature to around -40°C~125°C TA. In total, there are 16 terminations. This electronic part offers high-quality output due to its 1 channels. An 5V voltage supply should allow the electrical part to be turned on and run. An electrical component of this type can be found in the 16 series. Circuits based on SPST - NO/NC switching are used to construct these analog switch ics. There are 4 circuits in this multiplexer. If you are looking for variants of the digital switch, trying search with DG453. The internal resistance of this digital multiplexer is 7.3Ohm. To find out what the functions of 16 pins are, please refer to their datasheets. There is a standard Multiplexer or Switches analogue multiplexer here. In normalcircumstances, users should not exceed 36V volts for the multiplexer. A cost-effective Dual, Single supply type analogue multiplexer. 12V should be the lowest voltage fed to the electronic component. In order to operate this switch device, it would need a current of 5μA. The switch multiplexer may be damaged if it is exposed to voltage greater than 500nA. Dual supply volatge is feasible for this multiplexer. But it should not go beyond 22V. A dual power supply should have at least 5V voltage attached. The analog switch ic utilizes SEPARATE OUTPUT outputs in total. Operating 4 inputs is required. Don’t miss additional features of the electronic component such as: ALSO OPERATES WITH 12V SINGLE SUPPLY AND +/-15V DUAL SUPPLY.