Name: MAX395CAG+
Brand: Maxim Integrated
SKU: MAX395CAG+
Price: 8.64000 USD
Availability: InStock

new-10%

MAX395CAG+

Manufacturer part number:MAX395CAG+

Manufacturer:Maxim Integrated

Description:400ns, 400ns SPST - NO 100Ohm Analog Switches MAX395 24 Pins 100pA 5V 24-SSOP (0.209, 5.30mm Width)

Case Package:SOT-23

Datasheet:MAX395CAG+ Datasheet PDF

RoHs Status:non-compliant

Parameter Name	Value
Type	Parameter
Factory Lead Time	6 Weeks
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	24-SSOP (0.209, 5.30mm Width)
Number of Pins	24
Operating Temperature	0°C~70°C TA
Packaging	Tube
Published	1995
JESD-609 Code	e3
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	24
ECCN Code	EAR99
Resistance	175Ohm
Terminal Finish	Matte Tin (Sn)
Max Power Dissipation	1W
Technology	CMOS
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	8
Supply Voltage	5V
Terminal Pitch	0.65mm
Base Part Number	MAX395
Pin Count	24
Operating Supply Voltage	8V
Number of Channels	1
Number of Circuits	8
Max Supply Voltage	16V
Min Supply Voltage	2.7V
Operating Supply Current	7μA
Nominal Supply Current	30μA
Max Supply Current	20μA
Throw Configuration	SPST
Turn On Delay Time	500 ns
Voltage - Supply, Single/Dual (±)	2.7V~16V ±2.7V~8V
Supply Type	Dual, Single
Neg Supply Voltage-Nom (Vsup)	-5V
Turn-Off Delay Time	500 ns
Max Dual Supply Voltage	8V
On-State Resistance (Max)	100Ohm
Min Dual Supply Voltage	3V
Multiplexer/Demultiplexer Circuit	1:1
Off-state Isolation-Nom	90 dB
Current - Leakage (IS(off)) (Max)	100pA
Channel Capacitance (CS(off), CD(off))	2pF 2pF
On-state Resistance Match-Nom	5Ohm
Switch Circuit	SPST - NO
Switch Time (Ton, Toff) (Max)	400ns, 400ns
Charge Injection	2pC
Channel-to-Channel Matching (ΔRon)	5 Ω (Max)
Crosstalk	-90dB @ 100kHz
Switch-on Time-Max	400ns
Switch-off Time-Max	400ns
Height Seated (Max)	1.99mm
Width	5.29mm
Radiation Hardening	No
REACH SVHC	Unknown
RoHS Status	ROHS3 Compliant

MAX395CAG+ Product Details

MAX395CAG+ Overview

As the electronic part is packed in 24-SSOP (0.209, 5.30mm Width), international shipping is convenient. This high-reliability packaging method uses advanced packaging methods Tube. It is mounted in the position Surface Mount. Multiplexers and demultiplexers have a number of circuits 1:1. Increasing operating temperature to around 0°C~70°C TA. Total terminations are 24. High-quality output is provided by the electronic component's 1 channels. With a 5V voltage supply, the electrical component should be turned on and run. The electronic part body is injected with 24 pins. These analog multiplexers are built based on SPST - NO switching circuits. The multiplexer consists of 8 circuits. If you are looking for variants of the digital switch, trying search with MAX395. Analog switches have 175Ohm internal resistance. Datasheets for functions of 24 pins are available. It is normally recommended that users do not supply the multiplexer with voltages higher than 16V. The analog switch ic is of the Dual, Single supply type and is cost-effective. 2.7V is the lowest voltage the electrical component should receive. The switch device would be able to operate with 7μA current. If put voltage greater than 20μA on the device, damage may be caused to the analogue multiplexer. If put voltage greater than 8V on the multiplexer, damage may be caused to the device. In the case of dual power supplies, you should connect at least 3V. Operating voltages of 8V are compatible with the electrical part.