DG418AK Overview
The electrical component comes in 8-CDIP (0.300, 7.62mm) packaging, which makes it convenient to ship overseas. A high level of reliability can be achieved through the use of an advanced packaging method Tube. A switch device like this is mounted in Through Hole. In the multiplexer and demultiplexer, 1:1 represents the number of circuits. Operating temperature extended to -55°C~125°C TA. Totally, there are 8 terminations. Into the electrical component body are injected 8 pins. These analog multiplexers are built based on SPST - NO switching circuits. The circuits in this analogue multiplexer number 1. In this multiplexer, the internal resistance is 35Ohm. To find out what the 8 pins do, please refer to the datasheets. The analogue multiplexer in this example is a typical Multiplexer or Switches. Users shouldn't supply more than 36V voltage to the switch device. Digital switch that provides Dual, Single power at a cost-effective price. 13V should be the lowest voltage fed to the electronic component. A voltage higher than 1μA may cause damage to the switch multiplexer. For this switch device, it is feasible to have two supplies. However, the voltage should not exceed 22V. It is recommended that you attach at least 7V to your dual power supply. Drain to Source resistance for this electronic component is 35Ohm.
DG418AK Features
Switch Circuit: SPST - NO
Drain-to-Source resistance: 35Ohm
DG418AK Applications
There are a lot of Vishay Siliconix DG418AK Analog Switches & Multiplexers ICs applications.
- Avionics test equipment
- PDAs
- Precision instrumentation
- Transmit
- Remote wireless modules
- ISDN NT1/TA
- Multi-Line E1 Interface Cards
- SDH/SONET multiplexers
- Optical Applications
- FTTH
