DG2743DS-T1-E3 Overview
The electrical component comes in SOT-23-8 packaging, which makes it convenient to ship overseas. To ensure high reliability, a new packaging method Tape & Reel (TR) is used. This analog switch is mounted in Surface Mount. Multiplexers and demultiplexers have a ratio of 1:1. The operating temperature is extended to around -40°C~85°C TA. Total terminations are 8. A 1 channel electronic part produces high-quality output. When a voltage supply of 1.8V is used, the electronic component should be turned on and run. This electrical component is included in the 8 series of products. A SPST - NO/NC switching circuit is used to build these analog multiplexers. Try searching with DG2743 if you're looking for variants. A 8Ohm internal resistance characterizes this multiplexer. For functions related to 8 pins, please refer to the datasheets. Theswitch device is a typical Multiplexer or Switches. It is generally not recommended to supply a voltage higher than 3.6V to the switch device in normal circumstances. A cost-effective Single supply type analogue multiplexer. In order for the electronic part to function properly, the lowest voltage should be 1.5V. This digital switch can be operated with a current of 10nA. The voltage required by this switch device is 1.5V~3.6V, draining from a single voltage supply. A voltage higher than 1μA may cause damage to the switch multiplexer. The digital multiplexer has SEPARATE OUTPUT outputs that can be used. A 2 input needs to be operated. Don’t miss additional features of the electronic component such as: VIDEO APPLICATION.
DG2743DS-T1-E3 Features
1 Channels
Switch Circuit: SPST - NO/NC
10nA Supply Current
Additional Features: VIDEO APPLICATION
DG2743DS-T1-E3 Applications
There are a lot of Vishay Siliconix DG2743DS-T1-E3 Analog Switches & Multiplexers ICs applications.
- SDH
- Isolation
- T1/E1 Terminals
- MP3 players
- SDH/SONET multiplexers
- Ultrasound
- Cellular phones
- E1 Network Equipment
- High-Voltage
- PBX interfaces
