Name: DG413HSDN-T1-E4
Brand: Vishay Siliconix
SKU: DG413HSDN-T1-E4
Price: 4.85000 USD
Availability: InStock

new-10%

DG413HSDN-T1-E4

Manufacturer part number:DG413HSDN-T1-E4

Manufacturer:Vishay Siliconix

Description:105ns, 80ns SPST - NO/NC 35Ohm QUAD Analog Switches BREAK-BEFORE-MAKE DG413 16 Pins 250pA 15V 16-VQFN Exposed Pad

Case Package:SOT-23

Datasheet:DG413HSDN-T1-E4 Datasheet PDF

RoHs Status:non-compliant

Parameter Name	Value
Type	Parameter
Factory Lead Time	12 Weeks
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	16-VQFN Exposed Pad
Number of Pins	16
Weight	57.09594mg
Operating Temperature	-40°C~85°C TA
Packaging	Tape & Reel (TR)
Published	2013
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
Resistance	80Ohm
Subcategory	Multiplexer or Switches
Max Power Dissipation	1.88W
Technology	CMOS
Terminal Position	QUAD
Terminal Form	NO LEAD
Peak Reflow Temperature (Cel)	260
Number of Functions	4
Supply Voltage	15V
Terminal Pitch	0.65mm
Reach Compliance Code	unknown
[email protected] Reflow Temperature-Max (s)	40
Base Part Number	DG413
Output	SEPARATE OUTPUT
Pin Count	16
Qualification Status	Not Qualified
Number of Channels	1
Max Supply Voltage	44V
Min Supply Voltage	13V
Operating Supply Current	1μA
Power Dissipation	1.88W
Max Supply Current	1μA
Throw Configuration	SPST
Turn On Delay Time	105 ns
Number of Inputs	4
Voltage - Supply, Single/Dual (±)	12V ±5V~20V
Supply Type	Dual, Single
Neg Supply Voltage-Nom (Vsup)	-15V
Turn-Off Delay Time	105 ns
Max Dual Supply Voltage	22V
On-State Resistance (Max)	35Ohm
Min Dual Supply Voltage	7V
Dual Supply Voltage	15V
Multiplexer/Demultiplexer Circuit	1:1
Off-state Isolation-Nom	91 dB
Current - Leakage (IS(off)) (Max)	250pA
Channel Capacitance (CS(off), CD(off))	12pF 12pF
Switch Circuit	SPST - NO/NC
Switch Time (Ton, Toff) (Max)	105ns, 80ns
Charge Injection	22pC
Crosstalk	-88dB @ 1MHz
Switching	BREAK-BEFORE-MAKE
Switch-off Time-Max	90ns
Height	950μm
Length	4mm
Width	4mm
RoHS Status	ROHS3 Compliant

DG413HSDN-T1-E4 Product Details

DG413HSDN-T1-E4 Overview

As the electronic part is packed in 16-VQFN Exposed Pad, international shipping is convenient. A high level of reliability can be achieved through the use of an advanced packaging method Tape & Reel (TR). Multiplexers like this are mounted in the Surface Mount position. 1:1 is the ratio of multiplexer to demultiplexer circuits. Extended operating temperature around -40°C~85°C TA. In total, 16 terminations have occurred. As a result of its 1 channels, this electronic component provides high-quality output. If the voltage supply is 15V volts, the electrical component should be turned on and run. Into the electrical component body are injected 16 pins. Circuits based on SPST - NO/NC switching are used to construct these analog switch ics. Using the DG413 search parameter, you can discover variants of the switch. The internal resistance of this digital multiplexer is 80Ohm. To find out what the functions of 16 pins are, please refer to their datasheets. It is a typical Multiplexer or Switches analog multiplexer. Users should never supply a voltage higher than 44V to a switch device. Analogue multiplexers of the Dual, Single supply type that are cost-effective. 13V is the lowest voltage that should be fed to the electronic electronic part. For this digital switch to work, 1μA current would suffice. A voltage higher than 1μA may cause damage to the switch multiplexer. If put voltage greater than 22V on the multiplexer, damage may be caused to the device. A dual power supply should have at least 7V voltage attached. As far as the outputs go, this switch multiplexer utilizes SEPARATE OUTPUT of them. The 4 inputs need to be operated in order to work.