NLAS4684MNR2 Overview
Shipping overseas is convenient due to the electrical component's packing in 10-VFDFN Exposed Pad. High reliability is provided by advanced packaging method Tape & Reel (TR). Multiplexers like this are mounted in the Surface Mount position. Multiplexers and demultiplexers have a number of circuits 2:1. The operating temperature is extended to around -55°C~125°C TA. Total terminations are 10. Due to its 1 channels, the electrical component produces high-quality output. An 3V voltage supply should allow the electrical part to be turned on and run. There are 10 pins injected into the electronic part body. Multiplexers built on a SPDT switching circuit are built. This multiplexer is composed of 2 circuits. Look for analog switch ic variants by searching with NLAS4684. There is 800mOhm internal resistance in this digital multiplexer. Please refer to the datasheets for 10 pins functions. It is a typical Multiplexer or Switches analog multiplexer. A voltage higher than 5.5V should not normally be supplied to the switches. Single supply type digital switch with a low cost. A low voltage of 1.8V should be applied to the electronic component. In order to operate this switch device, it would need a current of 200nA. A voltage of 1.8V~5.5V is required for this switch device, which drains from a single voltage source. There are SEPARATE OUTPUT outputs on this analog switch ic. There is a voltage range of 5V operating voltages for the electrical part.
NLAS4684MNR2 Features
1 Channels
Switch Circuit: SPDT
200nA Supply Current
-3db Bandwidth: 9.5MHz
NLAS4684MNR2 Applications
There are a lot of ON Semiconductor NLAS4684MNR2 Analog Switches & Multiplexers ICs applications.
- Existing multiplexer applications (both fault-protected and nonfault-protected)
- RGB switches
- Audio and video switching
- SONET/SDH ADM
- Routers
- MP3 players
- Audio signal routing
- Avionics and Military Systems
- Digital cross connects (DSX-1)
- Communication systems
