Name: DG411LDY-T1
Brand: Vishay Siliconix
SKU: DG411LDY-T1
Availability: InStock

Technical Specifications

Parameter Name	Value
Type	Parameter
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	16-SOIC (0.154, 3.90mm Width)
Number of Pins	16
Supplier Device Package	16-SOIC
Weight	547.485991mg
Operating Temperature	-40°C~85°C TA
Packaging	Tape & Reel (TR)
Published	2015
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Resistance	50Ohm
Max Operating Temperature	85°C
Min Operating Temperature	-40°C
Max Power Dissipation	650mW
Base Part Number	DG411
Number of Outputs	4
Number of Channels	4
Number of Circuits	4
Max Supply Voltage	12V
Min Supply Voltage	2.7V
Operating Supply Current	1μA
Power Dissipation	650mW
Max Supply Current	1μA
Throw Configuration	SPST
Turn On Delay Time	50 ns
Number of Inputs	4
Voltage - Supply, Single/Dual (±)	2.7V~12V ±3V~6V
Supply Type	Dual, Single
Turn-Off Delay Time	35 ns
Max Dual Supply Voltage	6V
-3db Bandwidth	280MHz
On-State Resistance (Max)	17Ohm
Min Dual Supply Voltage	3V
Multiplexer/Demultiplexer Circuit	1:1
Current - Leakage (IS(off)) (Max)	250pA
Channel Capacitance (CS(off), CD(off))	5pF 6pF
Switch Circuit	SPST - NC
Switch Time (Ton, Toff) (Max)	19ns, 12ns
Charge Injection	5pC
Crosstalk	-95dB @ 1MHz
Height	1.55mm
Length	10mm
Width	4mm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant

DG411LDY-T1 Product Details

DG411LDY-T1 Overview

Due to its 16-SOIC (0.154, 3.90mm Width) packaging, the electronic part is convenient for international shipping. In order to provide high reliability, an advanced packaging method Tape & Reel (TR) is used. In Surface Mount, you'll find this switch device. There is 1:1 ratio between the number of multiplexers and demultiplexers. Operational temperature extended around -40°C~85°C TA. This electronic part offers high-quality output due to its 4 channels. On the other hand, analog switches can be constructed using SPST - NC switching circuits. There are 4 circuits in this switch device. Try searching for the analog switch ic with DG411 if you are looking for variants. An switch multiplexer with 50Ohm internal resistance has a value of 50Ohm. To find out what the functions of 16 pins are, please refer to their datasheets. In a normalsituation, users should not supply the switches with voltage higher than 12V. Analog switch ics with Dual, Single supply type are cost-effective. There should be 2.7V voltage fed to the electrical part below 2.7V. 1μA current would be enough for this multiplexer to operate. The switch multiplexer may be damaged if it is exposed to voltage greater than 1μA. It is possible to supply this switch device with dual voltages. However, it is not advisable to exceed 6V. In the case of dual power supplies, you should connect at least 3V. It is possible to operate 4 inputs. An environment with a temperature greater than 85°C should not be used to operate the digital switches. There are 4 outputs on the analogue multiplexer. It is possible to purchase a 16-SOIC package from suppliers.