Name: ADG709BRU-REEL
Brand: Hotenda
SKU: ADG709BRU-REEL
Availability: InStock

new-10%

ADG709BRU-REEL

Manufacturer part number:ADG709BRU-REEL

Manufacturer:Hotenda

Description:14ns, 8ns (Typ) SP4T 4.5Ohm DUAL Analog Switches BREAK-BEFORE-MAKE ADG709 16 Pins 10pA Typ 2.5V 16-TSSOP (0.173, 4.40mm Width)

Case Package:SOT-23

Datasheet:ADG709BRU-REEL Datasheet PDF

RoHs Status:non-compliant

Parameter Name	Value
Type	Parameter
Mounting Type	Surface Mount
Package / Case	16-TSSOP (0.173, 4.40mm Width)
Surface Mount	YES
Number of Pins	16
Operating Temperature	-40°C~125°C TA
Packaging	Tape & Reel (TR)
JESD-609 Code	e0
Pbfree Code	no
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
ECCN Code	EAR99
Resistance	4.5Ohm
Subcategory	Multiplexer or Switches
Max Power Dissipation	5μW
Technology	CMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	240
Number of Functions	1
Supply Voltage	2.5V
Terminal Pitch	0.65mm
Reach Compliance Code	not_compliant
Time@Peak Reflow Temperature-Max (s)	30
Base Part Number	ADG709
Pin Count	16
Qualification Status	Not Qualified
Operating Supply Voltage	5V
Power Supplies	3/5/+-3V
Number of Channels	4
Number of Circuits	2
Max Supply Voltage	5.5V
Min Supply Voltage	1.8V
Analog IC - Other Type	DIFFERENTIAL MULTIPLEXER
Power Dissipation	5μW
Throw Configuration	4PST
Number of Inputs	8
Voltage - Supply, Single/Dual (±)	1.8V~5.5V ±2.5V
Bandwidth	55MHz
Supply Current-Max (Isup)	0.001mA
Neg Supply Voltage-Nom (Vsup)	-2.5V
Turn-Off Delay Time	7 ns
On-State Resistance (Max)	4.5Ohm
Dual Supply Voltage	2.5V
Multiplexer/Demultiplexer Circuit	4:1
Off-state Isolation-Nom	60 dB
Current - Leakage (IS(off)) (Max)	10pA Typ
Channel Capacitance (CS(off), CD(off))	13pF 42pF
On-state Resistance Match-Nom	0.4Ohm
Switch Circuit	SP4T
Switch Time (Ton, Toff) (Max)	14ns, 8ns (Typ)
Charge Injection	3pC
Channel-to-Channel Matching (ΔRon)	400m Ω
Crosstalk	-80dB @ 1MHz
Switching	BREAK-BEFORE-MAKE
Switch-off Time-Max	15ns
Signal Current-Max	0.01A
Length	5mm
RoHS Status	Non-RoHS Compliant
Lead Free	Contains Lead

ADG709BRU-REEL Product Details

ADG709BRU-REEL Overview

Due to its 16-TSSOP (0.173, 4.40mm Width) packaging, the electronic part is convenient for international shipping. High reliability is achieved by using advanced packaging method Tape & Reel (TR). Mounted in Surface Mount is this multiplexer. Multiplexers and demultiplexers have the same number of circuits 4:1. Operation at a temperature around -40°C~125°C TA. A total of 16 terminations have been recorded. The electronic part delivers high-quality output through its 4 channels. Turning on and running the electrical part should be easy with a 2.5V voltage supply. This electronic part can be found in the 16 series. SP4T switching circuits are used in these analog switch ics. A 2 circuit is present in this switch device. ADG709 can be used to search for analog multiplexer variants. Internally, this switch multiplexer has a resistance of 4.5Ohm. You can find the functions of the 16 pins in the datasheets. A analogue multiplexer of this type is a Multiplexer or Switches. It is normally recommended that users do not supply the multiplexer with voltages higher than 5.5V. In order for the electronic part to function properly, the lowest voltage should be 1.8V. There is an analog IC DIFFERENTIAL MULTIPLEXER integrated with this board. It can operate from 5V operating voltages. Operating 8 inputs is required. 55MHz bandwidths enable data to be transferred.