Name: DG406DN-T1
Brand: Vishay Siliconix
SKU: DG406DN-T1
Availability: InStock

new-10%

DG406DN-T1

Manufacturer part number:DG406DN-T1

Manufacturer:Vishay Siliconix

Description:200ns, 150ns 100Ohm QUAD Analog Switches BREAK-BEFORE-MAKE 500pA 28-LCC (J-Lead)

Case Package:SOT-23

Datasheet:DG406DN-T1 Datasheet PDF

RoHs Status:non-compliant

Parameter Name	Value
Type	Parameter
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	28-LCC (J-Lead)
Number of Pins	28
Weight	1.182714g
Operating Temperature	-40°C~85°C TA
Packaging	Tube
Published	2016
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	28
Resistance	100Ohm
Subcategory	Multiplexer or Switches
Max Power Dissipation	450mW
Technology	CMOS
Terminal Position	QUAD
Terminal Form	J BEND
Number of Functions	1
Reach Compliance Code	unknown
Qualification Status	Not Qualified
Operating Supply Voltage	15V
Number of Channels	16
Number of Circuits	1
Max Supply Voltage	44V
Min Supply Voltage	7.5V
Analog IC - Other Type	DPDT
Power Dissipation	450mW
Max Supply Current	500μA
Propagation Delay	350 ns
Turn On Delay Time	600 ns
Number of Inputs	16
Voltage - Supply, Single/Dual (±)	12V ±5V~20V
Supply Type	Dual, Single
Turn-Off Delay Time	300 ns
Max Dual Supply Voltage	20V
On-State Resistance (Max)	100Ohm
Min Dual Supply Voltage	5V
Multiplexer/Demultiplexer Circuit	16:1
Current - Leakage (IS(off)) (Max)	500pA
Channel Capacitance (CS(off), CD(off))	8pF 130pF
Switch Time (Ton, Toff) (Max)	200ns, 150ns
Charge Injection	15pC
Channel-to-Channel Matching (ΔRon)	5 Ω
Switching	BREAK-BEFORE-MAKE
Signal Current-Max	0.03A
Height	3.69mm
Length	12.57mm
Width	12.57mm
RoHS Status	Non-RoHS Compliant

DG406DN-T1 Product Details

DG406DN-T1 Overview

Presented in 28-LCC (J-Lead), this electrical component is convenient for overseas shipping. A high level of reliability can be achieved through the use of an advanced packaging method Tube. Mounted in Surface Mount is this multiplexer. Multiplexer and demultiplexer circuits have a number 16:1. Increasing operating temperature to around -40°C~85°C TA. In total, there have been 28 terminations. A high-quality output is provided by the electrical component's 16 channels. There are 1 circuits in this switch device. Analog switches have 100Ohm internal resistance. For details about the functions of 28 pins, please refer to the datasheets. Multiplexer or Switches is a typical switch device. normally, users should not supply switches with voltages higher than 44V. An effective Dual, Single supply digital multiplexer. A low voltage of 7.5V should be applied to the electronic component. A digital multiplexer may suffer damage if voltage is applied above 500μA. For this multiplexer, dual supply voltage is feasible, but it should not exceed 20V. It is recommended that you attach at least 5V to your dual power supply. Integrated with an analog IC DPDT. It can operate from 15V operating voltages. The electrical component supports 16 inputs.