Name: M74HC4016B1R
Brand: STMicroelectronics
SKU: M74HC4016B1R
Availability: InStock

new-10%

M74HC4016B1R

Manufacturer part number:M74HC4016B1R

Manufacturer:STMicroelectronics

Description:14ns, 24ns SPST - NO 120Ohm DUAL Analog Switches BREAK-BEFORE-MAKE M74HC401 14 Pins 100nA 4.5V 14-DIP (0.279, 7.10mm)

Case Package:SOT-23

Datasheet:M74HC4016B1R Datasheet PDF

RoHs Status:non-compliant

Parameter Name	Value
Type	Parameter
Mount	Through Hole
Mounting Type	Through Hole
Package / Case	14-DIP (0.279, 7.10mm)
Number of Pins	14
Operating Temperature	-55°C~125°C TA
Packaging	Tube
JESD-609 Code	e3
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	14
Resistance	120Ohm
Terminal Finish	Matte Tin (Sn)
Subcategory	Multiplexer or Switches
Max Power Dissipation	500mW
Technology	CMOS
Terminal Position	DUAL
Peak Reflow Temperature (Cel)	NOT SPECIFIED
Number of Functions	4
Supply Voltage	4.5V
Time@Peak Reflow Temperature-Max (s)	NOT SPECIFIED
Base Part Number	M74HC401
Output	SEPARATE OUTPUT
Pin Count	14
Qualification Status	Not Qualified
Number of Channels	1
Max Supply Voltage	12V
Min Supply Voltage	2V
Operating Supply Current	8μA
Power Dissipation	500mW
Max Supply Current	8μA
Throw Configuration	SPST
Turn On Delay Time	100 ns
Number of Inputs	4
Supply Type	Single
Turn-Off Delay Time	150 ns
-3db Bandwidth	42MHz
On-State Resistance (Max)	120Ohm
Multiplexer/Demultiplexer Circuit	1:1
Off-state Isolation-Nom	50 dB
Current - Leakage (IS(off)) (Max)	100nA
Channel Capacitance (CS(off), CD(off))	1pF 5pF
On-state Resistance Match-Nom	16Ohm
Switch Circuit	SPST - NO
Switch Time (Ton, Toff) (Max)	14ns, 24ns
Channel-to-Channel Matching (ΔRon)	6 Ω
Crosstalk	-50dB @ 1MHz
Switching	BREAK-BEFORE-MAKE
Switch-on Time-Max	20ns
Switch-off Time-Max	30ns
Voltage - Supply, Single (V+)	2V~12V
Normal Position	NO
Height Seated (Max)	5.1mm
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

M74HC4016B1R Product Details

M74HC4016B1R Overview

This electronic part is conveniently packaged in 14-DIP (0.279, 7.10mm), making it easy to ship abroad. High reliability is achieved by using advanced packaging method Tube. Through Hole is where this multiplexer is located. There is 1:1 ratio between the number of multiplexers and demultiplexers. Operating temperature around -55°C~125°C TA extended. 14 terminations have been made so far. The electronic part provides high-quality output because it has 1 channels. Powered by a 4.5V voltage supply, the electrical part should be switched on and run. It is part of the design of the 14 series that this electronic component is included. Multiplexers built on a SPST - NO switching circuit are built. M74HC401 can be used to search for analog multiplexer variants. Internally, this switch multiplexer has a resistance of 120Ohm. For functions related to 14 pins, please refer to the datasheets. There is Multiplexer or Switches analog multiplexer like this in the world. An abnormal situation would be for the switch device to be supplied with a voltage greater than 12V. Analogue multiplexers of the Single supply type that are cost-effective. The lowest voltage fed to the electronic component should be 2V. In order to operate this switch device, it would need a current of 8μA. Using only a single voltage supply, this analog switch requires 2V~12V voltage. A voltage higher than 8μA may cause damage to the switch multiplexer. A total of SEPARATE OUTPUT outputs are available on this analog switch ic. In order to operate the 4 inputs, there are several steps to follow.