DG4051AEN-T1-E4 Overview
The electronic part can be shipped overseas conveniently because it is packaged in 16-WFQFN. In order to provide high reliability, an advanced packaging method Tape & Reel (TR) is used. There is an analog multiplexer mounted in position Surface Mount. There is 8:1 ratio between the number of multiplexers and demultiplexers. Around -40°C~125°C TA is the extended operating temperature. In total, there are 16 terminations. This electronic part offers high-quality output due to its 8 channels. In the case of a voltage supply of 3V volts, the electrical part can be powered up and run. There are 16 pins injected into the electronic part body. A total of 1 circuits make up this switch device. Search with DG4051 if you are looking for analog multiplexer variants. It has an internal resistance of 100Ohm. The functions of 16 pins can be found in the datasheets. In normalcircumstances, users should not exceed 12V volts for the multiplexer. Dual, Single supply type digital switch with a low cost. 2.7V is the lowest voltage that should be fed to the electronic electronic part. In order to operate this switch device, it would need a current of -1μA. A digital multiplexer may suffer damage if voltage is applied above 1μA. There's no problem with dual supply voltage for this switch device. However, it shouldn't exceed 5V. In the case of dual power supplies, you should connect at least 2.5V. There are 8 inputs to be operated. The transfer of data can be performed over 330MHz bandwidths.
DG4051AEN-T1-E4 Features
8 Channels
-1μA Supply Current
Bandwidth: 330MHz
DG4051AEN-T1-E4 Applications
There are a lot of Vishay Siliconix
DG4051AEN-T1-E4 Analog Switches & Multiplexers ICs applications.
- Isolation
- Medical
- Imaging
- Ultrasound
- Audio and video switching
- Automatic test equipment
- Precision data acquisition
- Battery-powered systems
- Sample-and-hold systems
- Communication systems
