DG3537DB-T5-E1 Overview
Due to its 8-WFBGA packaging, the electronic part is convenient for international shipping. Advanced packaging method Tape & Reel (TR) is used to provide high reliability. In Surface Mount, you'll find this switch device. Multiplexers and demultiplexers have a ratio of 1:1. Extended operating temperature around -40°C~85°C TA. These analog multiplexers are built based on SPST - NO/NC switching circuits. The multiplexer consists of 2 circuits. Try searching for the analog switch ic with DG3537 if you are looking for variants. In this multiplexer, the internal resistance is 4Ohm. To find out what the 8 pins do, please refer to the datasheets. A voltage higher than 5.5V should not normally be supplied to the switches. Analogue multiplexer with a Single supply type that is cost-effective. In order for the electronic part to function properly, the lowest voltage should be 1.8V. An operating current of 1nA would be sufficient for this switch device. Using only a single voltage supply, this analog switch requires 1.8V~5.5V voltage. When the digital multiplexer is charged above 1μA, damage can occur. A temperature above 85°C is not suitable for operation of the analogue multiplexer. Suppliers offer a package with 8-MicroFoot? (1.5x1.5).
DG3537DB-T5-E1 Features
Switch Circuit: SPST - NO/NC
1nA Supply Current
-3db Bandwidth: 360MHz
DG3537DB-T5-E1 Applications
There are a lot of Vishay Siliconix DG3537DB-T5-E1 Analog Switches & Multiplexers ICs applications.
- Data Acquisition Systems
- DVD-R
- PCMCIA cards
- Intelligent PBX
- Cable PC
- PBX interfaces
- Imaging
- Residential Gateways, Home Gateway/Router
- Ultrasound
- Battery-powered systems
