DG413LAK Overview
This electronic part is conveniently packaged in 16-CDIP (0.300, 7.62mm), making it easy to ship abroad. In order to provide high reliability, an advanced packaging method Tube is used. Through Hole is where this multiplexer is located. In the multiplexer and demultiplexer, 1:1 represents the number of circuits. Operation at a temperature around -55°C~125°C TA. In total, there are 16 terminations. High-quality output is provided by the electronic component's 1 channels. Powered by a 5V voltage supply, the electrical part should be switched on and run. There is an electrical component included in the 16 series. A SPST - NO/NC switching circuit is used for these analog switches. A total of 4 circuits make up this switch device. It has an internal resistance of 17Ohm. To find out what the functions of 16 pins are, please refer to their datasheets. The analogue multiplexer in this example is a typical Multiplexer or Switches. Users shouldn't supply more than 12V voltage to the switch device. A low voltage of 2.7V should be applied to the electronic component. If put voltage greater than 6V on the multiplexer, damage may be caused to the device. In the case of dual power supplies, you should connect at least 3V. As far as the outputs go, this switch multiplexer utilizes SEPARATE OUTPUT of them.
DG413LAK Features
1 Channels
Switch Circuit: SPST - NO/NC
-3db Bandwidth: 280MHz
DG413LAK Applications
There are a lot of Vishay Siliconix DG413LAK Analog Switches & Multiplexers ICs applications.
- Industrial and process control systems
- T1/E1 Terminals
- Digital Cross-Connects
- PCMCIA cards
- SONET/SDH ADM
- HDTV
- Sample-and-hold systems
- Audio/video switches
- Imaging
- Digital cross connects (DSX-1)
