Name: DG333ADW
Brand: Vishay Siliconix
SKU: DG333ADW
Availability: InStock

new-10%

DG333ADW

Manufacturer part number:DG333ADW

Manufacturer:Vishay Siliconix

Description:175ns, 145ns SPDT 45Ohm Analog Switches BREAK-BEFORE-MAKE 20 Pins 250pA 20-SOIC (0.295, 7.50mm Width)

Case Package:SOT-23

Datasheet:DG333ADW Datasheet PDF

RoHs Status:non-compliant

Parameter Name	Value
Type	Parameter
Factory Lead Time	8 Weeks
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	20-SOIC (0.295, 7.50mm Width)
Number of Pins	20
Weight	800.987426mg
Operating Temperature	-40°C~85°C TA
Packaging	Tube
Published	2014
JESD-609 Code	e0
Pbfree Code	no
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	20
Resistance	45Ohm
Terminal Finish	Tin/Lead (Sn/Pb)
Subcategory	Multiplexer or Switches
Max Power Dissipation	800mW
Technology	CMOS
Terminal Form	GULL WING
Number of Functions	4
Pin Count	20
Number of Outputs	8
Number of Channels	4
Number of Circuits	1
Max Supply Voltage	40V
Min Supply Voltage	5V
Operating Supply Current	30μA
Nominal Supply Current	30μA
Power Dissipation	800mW
Max Supply Current	200μA
Turn On Delay Time	175 ns
Voltage - Supply, Single/Dual (±)	5V~40V ±4V~22V
Supply Type	Dual, Single
Turn-Off Delay Time	145 ns
Max Dual Supply Voltage	22V
On-State Resistance (Max)	45Ohm
Min Dual Supply Voltage	4V
Multiplexer/Demultiplexer Circuit	2:1
Current - Leakage (IS(off)) (Max)	250pA
Channel Capacitance (CS(off), CD(off))	8pF
Switch Circuit	SPDT
Switch Time (Ton, Toff) (Max)	175ns, 145ns
Charge Injection	10pC
Channel-to-Channel Matching (ΔRon)	2 Ω (Max)
Crosstalk	-80dB @ 1MHz
Switching	BREAK-BEFORE-MAKE
Drain to Source Resistance	45Ohm
Height	2.34mm
Length	12.8mm
Width	7.49mm
Radiation Hardening	No
REACH SVHC	Unknown
RoHS Status	Non-RoHS Compliant

DG333ADW Product Details

DG333ADW Overview

Due to its 20-SOIC (0.295, 7.50mm Width) packaging, the electronic part is convenient for international shipping. High reliability is achieved by using advanced packaging method Tube. Mounted in Surface Mount is this multiplexer. Multiplexers and demultiplexers have the same number of circuits 2:1. Operation at a temperature around -40°C~85°C TA. A total of 20 terminations have been recorded. The electronic part delivers high-quality output through its 4 channels. Electronic part bodies are injected with 20 pins. SPDT switching circuits are used in these analog switch ics. A 1 circuit is present in this switch device. Internally, this switch multiplexer has a resistance of 45Ohm. You can find the functions of the 20 pins in the datasheets. A analogue multiplexer of this type is a Multiplexer or Switches. It is normally recommended that users do not supply the multiplexer with voltages higher than 40V. Digital switch that provides Dual, Single power at a cost-effective price. In order for the electronic part to function properly, the lowest voltage should be 5V. The switch device would be able to operate with 30μA current. It may damage the digital multiplexer if the voltage is higher than 200μA. It is possible to supply this switch device with dual voltages. However, it is not advisable to exceed 22V. If you are using a dual power supply, you should attach at least 4V. Drain to Source resistance for this electronic component is 45Ohm. The analog switch ics includes 8 outputs.