Name: DG303BDY-T1-E3
Brand: Vishay Siliconix
SKU: DG303BDY-T1-E3
Price: 6.30000 USD
Availability: InStock

new-10%

DG303BDY-T1-E3

Manufacturer part number:DG303BDY-T1-E3

Manufacturer:Vishay Siliconix

Description:300ns, 250ns DPST - NO/NC 50Ohm Analog Switches BREAK-BEFORE-MAKE DG303 14 Pins 1nA 15V 14-SOIC (0.154, 3.90mm Width)

Case Package:SOT-23

Datasheet:DG303BDY-T1-E3 Datasheet PDF

RoHs Status:non-compliant

Parameter Name	Value
Type	Parameter
Factory Lead Time	12 Weeks
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	14-SOIC (0.154, 3.90mm Width)
Number of Pins	14
Operating Temperature	-40°C~85°C TA
Packaging	Tape & Reel (TR)
Published	2014
JESD-609 Code	e3
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	14
Resistance	30Ohm
Terminal Finish	Matte Tin (Sn)
Subcategory	Multiplexer or Switches
Max Power Dissipation	600mW
Technology	CMOS
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	2
Supply Voltage	15V
[email protected] Reflow Temperature-Max (s)	30
Base Part Number	DG303
Pin Count	14
Number of Outputs	4
Qualification Status	Not Qualified
Operating Supply Voltage	15V
Number of Channels	1
Number of Circuits	2
Max Supply Voltage	36V
Min Supply Voltage	13V
Operating Supply Current	230μA
Nominal Supply Current	230μA
Power Dissipation	600mW
Max Supply Current	1mA
Throw Configuration	DPST, SPDT
Turn On Delay Time	150 ns
Supply Type	Dual, Single
Neg Supply Voltage-Nom (Vsup)	-15V
Turn-Off Delay Time	130 ns
Max Dual Supply Voltage	22V
On-State Resistance (Max)	50Ohm
Min Dual Supply Voltage	7V
Dual Supply Voltage	15V
Multiplexer/Demultiplexer Circuit	2:1
Off-state Isolation-Nom	62 dB
Current - Leakage (IS(off)) (Max)	1nA
Channel Capacitance (CS(off), CD(off))	14pF 14pF
Switch Circuit	DPST - NO/NC
Switch Time (Ton, Toff) (Max)	300ns, 250ns
Charge Injection	8pC
Crosstalk	-74dB @ 500kHz
Switching	BREAK-BEFORE-MAKE
Drain to Source Resistance	50Ohm
Voltage - Supply, Dual (V±)	±15V
Height Seated (Max)	1.75mm
Length	8.65mm
Width	3.9mm
REACH SVHC	Unknown
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

DG303BDY-T1-E3 Product Details

DG303BDY-T1-E3 Overview

Shipping overseas is convenient due to the electrical component's packing in 14-SOIC (0.154, 3.90mm Width). A high level of reliability can be achieved through the use of an advanced packaging method Tape & Reel (TR). Multiplexers like this are mounted in the Surface Mount position. The ratio between the number of multiplexer and demultiplexer circuits is 2:1. Increasing operating temperature to around -40°C~85°C TA. In total, there are 14 terminations. A high-quality output is provided by the electrical component's 1 channels. It is safe to turn on and run the electronic component with a 15V voltage supply. An electrical component of this type can be found in the 14 series. On the other hand, analog switches can be constructed using DPST - NO/NC switching circuits. There are 2 circuits in this multiplexer. If you are looking for variants of the digital switch, trying search with DG303. Analog switches have 30Ohm internal resistance. For functions related to 14 pins, please refer to the datasheets. A analogue multiplexer of this type is a Multiplexer or Switches. Multiplexers should not be powered above 36V in normal situations. A cost-effective Dual, Single supply type analogue multiplexer. The lowest voltage the electronic part should receive is 13V. For this digital switch to work, 230μA current would suffice. Putting voltage greater than 1mA on the multiplexer may cause damage. Despite this switch device's dual supply capability, its voltage should not exceed 22V. If you are using a dual power supply, you should attach at least 7V. It can operate from 15V operating voltages. Drain to Source resistance is 50Ohm. 4 outputs are included in the analogue multiplexer.