ADG1613BRUZ-REEL Overview
Shipping overseas is convenient with the electronic component packed in 16-TSSOP (0.173, 4.40mm Width). This packaging method provides high reliability because it uses advanced packaging techniques. Mounted in Surface Mount is this multiplexer. 1:1 is the ratio of multiplexer to demultiplexer circuits. Operation at a temperature around -40°C~125°C TA. In total, 16 terminations have occurred. Electronic part bodies are injected with 16 pins. Multiplexers built on a SPST - NO/NC switching circuit are built. Search with ADG1613 if you are looking for analog multiplexer variants. It has an internal resistance of 1.1Ohm. For details about the functions of 16 pins, please refer to the datasheets. A analogue multiplexer of this type is a Multiplexer or Switches. Users shouldn't supply more than 16V voltage to the switch device. A cost-effective Dual, Single supply type analogue multiplexer. A low voltage of 3.3V should be applied to the electronic component. This multiplexer would work with 320μA current. A digital multiplexer may suffer damage if voltage is applied above 480μA. It is possible to supply this switch device with dual voltages. However, it is not advisable to exceed 8V. If you are using dual power supplies, you should attach at least 3.3V. There are SEPARATE OUTPUT outputs on this analog switch ic. Operating 4 inputs is required. The transfer of data can be performed over 38MHz bandwidths.
ADG1613BRUZ-REEL Features
Switch Circuit: SPST - NO/NC
320μA Supply Current
Bandwidth: 38MHz
ADG1613BRUZ-REEL Applications
There are a lot of Analog Devices Inc. ADG1613BRUZ-REEL Analog Switches & Multiplexers ICs applications.
- Cable PC
- 65 V DACs
- Modems
- Microprocessor Controlled Analog Systems
- Precision instrumentation
- Microprocessor controlled systems
- Cable Telephony – NIU, Set-Top Box, Home Side Box
- Private Branch Exchange (PBX)
- ADCs such as AD7840/8, AD7870/1/2/4/5/6/8
- Signal routing between systems
