Name: DG2750DN-T1-E4
Brand: Vishay Siliconix
SKU: DG2750DN-T1-E4
Price: 1.98000 USD
Availability: InStock

new-10%

DG2750DN-T1-E4

Manufacturer part number:DG2750DN-T1-E4

Manufacturer:Vishay Siliconix

Description:2.1μs, 130ns SPDT 1Ohm QUAD Analog Switches BREAK-BEFORE-MAKE DG2750 10 Pins 50nA Typ 2.7V 10-UFQFN

Case Package:SOT-23

Datasheet:DG2750DN-T1-E4 Datasheet PDF

RoHs Status:non-compliant

Parameter Name	Value
Type	Parameter
Factory Lead Time	10 Weeks
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	10-UFQFN
Number of Pins	10
Operating Temperature	-40°C~85°C TA
Packaging	Tape & Reel (TR)
Published	2013
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	10
Resistance	1Ohm
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory	Multiplexer or Switches
Max Power Dissipation	208mW
Technology	CMOS
Terminal Position	QUAD
Peak Reflow Temperature (Cel)	260
Number of Functions	2
Supply Voltage	2.7V
Terminal Pitch	0.4mm
Time@Peak Reflow Temperature-Max (s)	40
Base Part Number	DG2750
Output	SEPARATE OUTPUT
Pin Count	10
Power Supplies	1.8/4V
Number of Channels	1
Number of Circuits	2
Max Supply Voltage	5.5V
Min Supply Voltage	1.8V
Operating Supply Current	2μA
Nominal Supply Current	2μA
Max Supply Current	2μA
Turn On Delay Time	2.1 μs
Supply Type	Single
Turn-Off Delay Time	130 ns
-3db Bandwidth	49MHz
On-State Resistance (Max)	1Ohm
Multiplexer/Demultiplexer Circuit	2:1
Off-state Isolation-Nom	55 dB
Current - Leakage (IS(off)) (Max)	50nA Typ
Channel Capacitance (CS(off), CD(off))	36pF
On-state Resistance Match-Nom	0.1Ohm
Switch Circuit	SPDT
Switch Time (Ton, Toff) (Max)	2.1μs, 130ns
Charge Injection	4pC
Channel-to-Channel Matching (ΔRon)	100m Ω
Crosstalk	-60dB @ 300kHz
Switching	BREAK-BEFORE-MAKE
Switch-on Time-Max	1700ns
Switch-off Time-Max	150ns
Voltage - Supply, Single (V+)	1.8V~5V
Height Seated (Max)	0.6mm
Length	1.8mm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

DG2750DN-T1-E4 Product Details

DG2750DN-T1-E4 Overview

The electronic part can be shipped overseas conveniently because it is packaged in 10-UFQFN. A high level of reliability can be achieved through the use of an advanced packaging method Tape & Reel (TR). Surface Mount is where this multiplexer is located. There is 2:1 ratio between the number of multiplexers and demultiplexers. Operation at a temperature around -40°C~85°C TA. A total of 10 terminations have been recorded. A electrical component with 1 channels is capable of high-quality output. When a voltage supply of 2.7V is used, the electronic component should be turned on and run. There is an electrical component included in the 10 series. SPDT switching circuits are used in these analog switch ics. A total of 2 circuits make up this switch device. Search with DG2750 if you are looking for analog multiplexer variants. In this multiplexer, the internal resistance is 1Ohm. The functions of 10 pins can be found in the datasheets. This switch device is a typical Multiplexer or Switches. Multiplexers should not be powered above 5.5V in normal situations. Analog switch ics with Single supply type are cost-effective. It is recommended to use 1.8V as the lowest voltage for the electrical part. This digital switch can be operated with a current of 2μA. This analog switch requires a voltage of 1.8V~5V to drain from a single voltage supply. The switch multiplexer may be damaged if it is exposed to voltage greater than 2μA. There are SEPARATE OUTPUT outputs on this analog switch ic.