Name: ADG712BRZ-REEL7
Brand: Hotenda
SKU: ADG712BRZ-REEL7
Price: 3.62000 USD
Availability: InStock

new-10%

ADG712BRZ-REEL7

Manufacturer part number:ADG712BRZ-REEL7

Manufacturer:Hotenda

Description:11ns, 6ns (Typ) SPST - NO 4Ohm DUAL Analog Switches BREAK-BEFORE-MAKE ADG712 16 Pins 100pA 3V 16-SOIC (0.154, 3.90mm Width)

Case Package:SOT-23

Datasheet:ADG712BRZ-REEL7 Datasheet PDF

RoHs Status:non-compliant

Parameter Name	Value
Type	Parameter
Factory Lead Time	8 Weeks
Lifecycle Status	PRODUCTION (Last Updated: 3 weeks ago)
Contact Plating	Tin
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	16-SOIC (0.154, 3.90mm Width)
Number of Pins	16
Operating Temperature	-40°C~85°C TA
Packaging	Tape & Reel (TR)
JESD-609 Code	e3
Pbfree Code	no
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
ECCN Code	EAR99
Resistance	4Ohm
Additional Feature	CAN ALSO OPERATE WITH 5 V SUPPLY
Subcategory	Multiplexer or Switches
Max Power Dissipation	5μW
Technology	CMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	4
Supply Voltage	3V
Terminal Pitch	1.27mm
[email protected] Reflow Temperature-Max (s)	30
Base Part Number	ADG712
Pin Count	16
Qualification Status	Not Qualified
Polarity	Non-Inverting
Power Supplies	3/5V
Number of Channels	4
Interface	Parallel
Max Supply Voltage	5.5V
Min Supply Voltage	1.8V
Operating Supply Current	1nA
Power Dissipation	5μW
Max Supply Current	1μA
Throw Configuration	SPST
Turn On Delay Time	11 ns
Supply Type	Single
Bandwidth	200MHz
Turn-Off Delay Time	6 ns
On-State Resistance (Max)	4Ohm
High Level Output Current	30mA
Multiplexer/Demultiplexer Circuit	1:1
Off-state Isolation-Nom	58 dB
Current - Leakage (IS(off)) (Max)	100pA
Channel Capacitance (CS(off), CD(off))	10pF 10pF
On-state Resistance Match-Nom	0.1Ohm
Switch Circuit	SPST - NO
Switch Time (Ton, Toff) (Max)	11ns, 6ns (Typ)
Charge Injection	3pC
Crosstalk	-90dB @ 10MHz
Switching	BREAK-BEFORE-MAKE
Switch-on Time-Max	20ns
Switch-off Time-Max	12ns
Voltage - Supply, Single (V+)	1.8V~5.5V
Normal Position	NC
Height Seated (Max)	1.75mm
Length	9.9mm
RoHS Status	ROHS3 Compliant
Lead Free	Contains Lead

ADG712BRZ-REEL7 Product Details

ADG712BRZ-REEL7 Overview

Presented in 16-SOIC (0.154, 3.90mm Width), this electrical component is convenient for overseas shipping. High reliability is achieved by using advanced packaging method Tape & Reel (TR). This analog switch is mounted in Surface Mount. Multiplexer and demultiplexer circuits have a number 1:1. Operational temperature extended around -40°C~85°C TA. In total, there are 16 terminations. A electrical component with 4 channels is capable of high-quality output. When a voltage supply of 3V is used, the electronic component should be turned on and run. This electrical component is included in the 16 series of products. Circuits based on SPST - NO switching are used to construct these analog switch ics. ADG712 can be used to search for analog multiplexer variants. It has an internal resistance of 4Ohm. For functions related to 16 pins, please refer to the datasheets. The analogue multiplexer in this example is a typical Multiplexer or Switches. It is generally not recommended to supply a voltage higher than 5.5V to the switch device in normal circumstances. An effective Single supply digital multiplexer. 1.8V is the lowest voltage that should be fed to the electronic electronic part. The analogue multiplexer could operate on 1nA current. Using a single voltage supply, this switch device consumes 1.8V~5.5V volts. A voltage higher than 1μA may cause damage to the switch multiplexer. 200MHz-bandwidths can be used to transfer data between multiplexers. There is also CAN ALSO OPERATE WITH 5 V SUPPLY to look out for in this electronic part.