Name: DG2737DN-T1-E4
Brand: Vishay Siliconix
SKU: DG2737DN-T1-E4
Price: 0.64000 USD
Availability: InStock

new-10%

DG2737DN-T1-E4

Manufacturer part number:DG2737DN-T1-E4

Manufacturer:Vishay Siliconix

Description:60ns, 50ns SPDT 8Ohm QUAD Analog Switches BREAK-BEFORE-MAKE DG2737 8 Pins 10nA 3V 8-UFQFN

Case Package:SOT-23

Datasheet:DG2737DN-T1-E4 Datasheet PDF

RoHs Status:non-compliant

Parameter Name	Value
Type	Parameter
Factory Lead Time	12 Weeks
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	8-UFQFN
Number of Pins	8
Operating Temperature	-40°C~85°C TA
Packaging	Tape & Reel (TR)
Published	2013
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
Resistance	8Ohm
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory	Multiplexer or Switches
Max Power Dissipation	190mW
Technology	CMOS
Terminal Position	QUAD
Terminal Form	NO LEAD
Peak Reflow Temperature (Cel)	260
Number of Functions	2
Supply Voltage	3V
Terminal Pitch	0.4mm
Reach Compliance Code	unknown
Time@Peak Reflow Temperature-Max (s)	40
Base Part Number	DG2737
Output	SEPARATE OUTPUT
Pin Count	8
Qualification Status	Not Qualified
Power Supplies	3V
Number of Channels	1
Number of Circuits	1
Max Supply Voltage	4.3V
Min Supply Voltage	2.3V
Operating Supply Current	1μA
Max Supply Current	1μA
Throw Configuration	SPST
Turn On Delay Time	60 ns
Supply Type	Single
Turn-Off Delay Time	50 ns
-3db Bandwidth	720MHz
On-State Resistance (Max)	8Ohm
Multiplexer/Demultiplexer Circuit	2:1
Off-state Isolation-Nom	28 dB
Current - Leakage (IS(off)) (Max)	10nA
Channel Capacitance (CS(off), CD(off))	4.4pF 3.8pF
On-state Resistance Match-Nom	0.1Ohm
Switch Circuit	SPDT
Switch Time (Ton, Toff) (Max)	60ns, 50ns
Charge Injection	10.4pC
Channel-to-Channel Matching (ΔRon)	100m Ω
Crosstalk	-109dB @ 1MHz
Switching	BREAK-BEFORE-MAKE
Switch-on Time-Max	70ns
Voltage - Supply, Single (V+)	2.3V~4.3V
Normal Position	NC
Height Seated (Max)	0.6mm
RoHS Status	ROHS3 Compliant

DG2737DN-T1-E4 Product Details

DG2737DN-T1-E4 Overview

Due to its 8-UFQFN packaging, the electronic part is convenient for international shipping. The advanced packaging method Tape & Reel (TR) provides high reliability. The multiplexer is located in Surface Mount. Multiplexers and demultiplexers have a ratio of 2:1. Around -40°C~85°C TA is the extended operating temperature. A total of 8 terminations have been recorded. A electrical component with 1 channels is capable of high-quality output. In the case of a voltage supply of 3V volts, the electrical part can be powered up and run. Into the electrical component body are injected 8 pins. These analog multiplexers are built based on SPDT switching circuits. A total of 1 circuits make up this switch device. Search with DG2737 if you are looking for analog multiplexer variants. Analog switches have 8Ohm internal resistance. The datasheets for the 8 pins explain the functions. There is Multiplexer or Switches analog multiplexer like this in the world. normally, users should not supply switches with voltages higher than 4.3V. Analogue multiplexer with a Single supply type that is cost-effective. It is recommended to use 2.3V as the lowest voltage for the electrical part. For this digital switch to work, 1μA current would suffice. This analog switch requires a voltage of 2.3V~4.3V to drain from a single voltage supply. A digital multiplexer may suffer damage if voltage is applied above 1μA. As far as the outputs go, this switch multiplexer utilizes SEPARATE OUTPUT of them.