Name: DG202CSE+
Brand: Maxim Integrated
SKU: DG202CSE+
Price: 11.45000 USD
Availability: InStock

new

DG202CSE+

Manufacturer part number:DG202CSE+

Manufacturer:Maxim Integrated

Description:600ns, 450ns SPST - NO 200Ohm Analog Switches BREAK-BEFORE-MAKE DG202 16 Pins 5nA 15V 16-SOIC (0.154, 3.90mm Width)

Case Package:SOT-23

Datasheet:DG202CSE+ Datasheet PDF

RoHs Status:non-compliant

Parameter Name	Value
Type	Parameter
Factory Lead Time	6 Weeks
Mounting Type	Surface Mount
Package / Case	16-SOIC (0.154, 3.90mm Width)
Surface Mount	YES
Number of Pins	16
Operating Temperature	0°C~70°C TA
Packaging	Tube
Published	2006
JESD-609 Code	e3
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
ECCN Code	EAR99
Resistance	200Ohm
Terminal Finish	Matte Tin (Sn)
Subcategory	Multiplexer or Switches
Max Power Dissipation	696mW
Technology	CMOS
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	4
Supply Voltage	15V
Terminal Pitch	1.27mm
Time@Peak Reflow Temperature-Max (s)	30
Base Part Number	DG202
Output	SEPARATE OUTPUT
Pin Count	16
Operating Supply Voltage	18V
Power Supplies	+-15V
Number of Channels	1
Number of Circuits	4
Max Supply Voltage	25V
Nominal Supply Current	20μA
Max Supply Current	100μA
Throw Configuration	SPST
Turn On Delay Time	600 ns
Supply Type	Dual, Single
Neg Supply Voltage-Nom (Vsup)	-15V
Turn-Off Delay Time	450 ns
Max Dual Supply Voltage	18V
On-State Resistance (Max)	200Ohm
Min Dual Supply Voltage	4.5V
Multiplexer/Demultiplexer Circuit	1:1
Off-state Isolation-Nom	70 dB
Current - Leakage (IS(off)) (Max)	5nA
Channel Capacitance (CS(off), CD(off))	5pF 5pF
Switch Circuit	SPST - NO
Switch Time (Ton, Toff) (Max)	600ns, 450ns
Charge Injection	20pC
Crosstalk	-90dB @ 100kHz
Switching	BREAK-BEFORE-MAKE
Normal Position	NO
Voltage - Supply, Dual (V±)	±4.5V~18V
Height Seated (Max)	1.75mm
Length	9.9mm
Width	3.9mm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

DG202CSE+ Product Details

DG202CSE+ Overview

The electrical component comes in 16-SOIC (0.154, 3.90mm Width) packaging, which makes it convenient to ship overseas. This high-reliability packaging method uses advanced packaging methods Tube. The multiplexer is located in Surface Mount. 1:1 is the ratio of multiplexer to demultiplexer circuits. Around 0°C~70°C TA is the extended operating temperature. In total, there have been 16 terminations. Due to its 1 channels, the electrical component produces high-quality output. An 15V voltage supply should allow the electrical part to be turned on and run. The electrical component body receives 16 pins. The analog switch ics are built using SPST - NO switching circuits. This multiplexer is composed of 4 circuits. Try searching with DG202 to find analog multiplexer variants. This digital multiplexer has 200Ohm internal resistance. The datasheets for the 16 pins explain the functions. This switch device is a typical Multiplexer or Switches. It is generally not recommended to supply a voltage higher than 25V to the switch device in normal circumstances. The analog switch ic is of the Dual, Single supply type and is cost-effective. Put voltage above 100μA on the multiplexer to cause damage. Despite this switch's dual supply capability, its voltage should not exceed 18V. You should attach at least 4.5V voltage if you are using dual power supply. SEPARATE OUTPUT outputs are utilized by this digital multiplexer. 18V operating voltages are supported by the electronic component.