DG2503DB-T2-GE1 Overview
Packed in 16-XFBGA, WLCSP, the electronic component is convenient for shipping overseas. High reliability is provided by advanced packaging method Tape & Reel (TR). The multiplexer is located in Surface Mount. 1:1 is the ratio of multiplexer to demultiplexer circuits. Extended operating temperature around -40°C~85°C TA. The analog switch ics are built using SPST - NO/NC switching circuits. The circuits in this analogue multiplexer number 4. It has an internal resistance of 8Ohm. The functions of 16 pins can be found in the datasheets. It is normally recommended that users do not supply the multiplexer with voltages higher than 5.5V. A cost-effective Single supply type analogue multiplexer. There should be 1.8V voltage fed to the electrical part below 1.8V. A voltage of 1.8V~5.5V is required to drain this analog switch from a single voltage supply. Putting voltage greater than 30μA on the multiplexer may cause damage.
DG2503DB-T2-GE1 Features
Switch Circuit: SPST - NO/NC
-3db Bandwidth: 550MHz
DG2503DB-T2-GE1 Applications
There are a lot of Vishay Siliconix DG2503DB-T2-GE1 Analog Switches & Multiplexers ICs applications.
- New designs requiring multiplexer functions
- Relay replacements
- Avionics test equipment
- Optical Applications
- Residential Gateways, Home Gateway/Router
- Automotive applications
- Digital access cross connects
- ADCs such as AD7840/8, AD7870/1/2/4/5/6/8
- Relay Replacement
- Wireless Local Loop
