DG2303DL-T1-E3 Overview
This electronic part is conveniently packaged in 5-TSSOP, SC-70-5, SOT-353, making it easy to ship abroad. The advanced packaging method Tape & Reel (TR) provides high reliability. Surface Mount is where this multiplexer is located. Multiplexers and demultiplexers have the same number of circuits 1:1. Increasing operating temperature to around -40°C~85°C TA. Total terminations are 5. Due to its 1 channels, the electrical component produces high-quality output. In the case of a voltage supply of 1.8V volts, the electrical part can be powered up and run. A total of 5 pins are injected into the electrical part body. These analog multiplexers are built based on SPST - NO switching circuits. Look for analog switch ic variants by searching with DG2303. Analog switches have 15Ohm internal resistance. To find out what the functions of 5 pins are, please refer to their datasheets. Multiplexer or Switches is a typical switch device. An abnormal situation would be for the switch device to be supplied with a voltage greater than 5.5V. An effective Single supply digital multiplexer. The lowest voltage fed to the electronic component should be 1.65V. This digital switch can be operated with a current of 1μA. The voltage required by this switch device is 1.65V~5.5V, draining from a single voltage supply. A digital multiplexer may suffer damage if voltage is applied above 1μA. There are 1 inputs to be operated.
DG2303DL-T1-E3 Features
1 Channels
Switch Circuit: SPST - NO
1μA Supply Current
DG2303DL-T1-E3 Applications
There are a lot of Vishay Siliconix DG2303DL-T1-E3 Analog Switches & Multiplexers ICs applications.
- Industrial control systems
- Multi-Line E1 Interface Cards
- RGB switches
- DVD-R
- Routers
- Cable Modem
- PDH Multiplexers
- Digital cross connects (DSX-1)
- Medical systems
- Short/Medium Loop: approximately 2000 ft. of 26 AWG and 5 REN loads
