DG1412EQ-T1-GE3 Overview
Presented in 16-TSSOP (0.173, 4.40mm Width), this electrical component is convenient for overseas shipping. This high-reliability packaging method uses advanced packaging methods Tape & Reel (TR). There is an analog multiplexer mounted in position Surface Mount. Multiplexers and demultiplexers have the same number of circuits 1:1. Temperatures around -40°C~125°C TA are extended for operation. Total terminations are 16. The electronic part provides high-quality output because it has 1 channels. Turning on and running the electrical part should be easy with a 5V voltage supply. SPST - NO switching circuits are used in these analog switch ics. 4 circuits are used in this analogue multiplexer. Try searching for the analog switch ic with DG1412 if you are looking for variants. It has an internal resistance of 1.8Ohm. Datasheets for functions of 16 pins are available. It is generally not recommended to supply a voltage higher than 24V to the switch device in normal circumstances. Analogue multiplexer with a Dual, Single supply type that is cost-effective. In order for the electronic part to function properly, the lowest voltage should be 4.5V. If put voltage greater than 1μA on the device, damage may be caused to the analogue multiplexer. It is possible to supply this switch device with dual voltages. However, it is not advisable to exceed 15V. It is recommended that you attach at least 4.5V to your dual power supply.
DG1412EQ-T1-GE3 Features
1 Channels
Switch Circuit: SPST - NO
-3db Bandwidth: 210MHz
DG1412EQ-T1-GE3 Applications
There are a lot of Vishay Siliconix DG1412EQ-T1-GE3 Analog Switches & Multiplexers ICs applications.
- Communications systems
- Audio and video switching
- FTTH
- Multi-Line E1 Interface Cards
- Digital Cross-Connects
- Low-Voltage
- PBXs
- Relay Replacement
- PDH Multiplexers
- Video signal routing
