OPF472 Overview
To protect them from damage, these photodiodes are packaged in the Bulk. For safety reasons, the photodiodes are packaged in TO-46-3 packages. When reverse-biased continuously, photodiodes can withstand a maximum voltage of 100V. When operating in reverse-bias mode, the photodiodes should not exceed 100V. There are 3 pins on the photodiodes. In a circuit, photodiodes could release 200mW heat. Photodiodes should operate at a temperature of 85°C. In spite of this, the photodiodes should be operated at a minimum operating temperature of -40°C. In the case of photodiodes, the reverse anode voltage should be 100V. To make sure photodiodes work, the breakdown voltage should be 100V. Reverse-biased photodiodes could supply 100V voltage. In the absence of light input, a photodiode produces 100pA current.
OPF472 Features
Moisture Sensitivity Level (MSL): 1 (Unlimited)
Operating Temperature: -40°C~85°C
Packaging: Bulk
Diode Type: PIN
Mount: Panel, Through Hole
Spectral Range: 500nm ~ 1100nm
Response Time: 20ns
OPF472 Applications
There are a lot of TT Electronics/Optek Technology
OPF472 Photodiodes applications.
- Infrared remote control
- Infrared data transmission
- Photo interrupters
- Shaft encoders
- Electronic Equipment
- Industrial Automation
- Machine Controls
- Light Barriers
- Vision Controls
- Measurement Levelling
