TC74AC273F(EL,F) Overview
It is packaged in the way of 20-SOIC (0.209, 5.30mm Width). A package named Cut Tape (CT)includes it. The output it is configured with uses Non-Inverted. It is configured with the trigger Positive Edge. There is an electric part mounted in the way of Surface Mount. A voltage of 2V~5.5Vis required for its operation. Temperature is set to -40°C~85°C TA. D-Typedescribes this flip flop. In terms of FPGAs, it belongs to the TC74AC series. You should not exceed 150MHzin its output frequency. A total of 1elements are contained within it. As a result, it consumes 80μA quiescent current and is not affected by external forces. There are 20 terminations,This JK flip flop has a 5pFfarad input capacitance. There is a base part number FF/Latchesfor the RS flip flops. In view of its reliability, this D flip flop is a good fit for TAPE AND REEL. A power supply of 3.3/5Vis required to operate it.
TC74AC273F(EL,F) Features
Cut Tape (CT) package
TC74AC series
3.3/5V power supplies
TC74AC273F(EL,F) Applications
There are a lot of Toshiba Semiconductor and Storage TC74AC273F(EL,F) Flip Flops applications.
- Data storage
- Frequency Divider circuits
- Balanced Propagation Delays
- Bounce elimination switch
- Count Modes
- Common Clocks
- CMOS Process
- Data transfer
- Matched Rise and Fall
- Latch
