SN74ACT74N Overview
The package is in the form of 14-DIP (0.300, 7.62mm). It is contained within the Tubepackage. Currently, the output is configured to use Differential. It is configured with a trigger that uses a value of Positive Edge. Through Holeis occupied by this electronic component. With a supply voltage of 4.5V~5.5V volts, it operates. The operating temperature is -40°C~85°C TA. This D latch has the type D-Type. In terms of FPGAs, it belongs to the 74ACT series. You should not exceed 210MHzin its output frequency. It consumes 2μA of quiescent current without being affected by external factors. Terminations are 14. Members of the 74ACT74family make up this object. The power supply voltage is 5V. There is 3pF input capacitance for this T flip flop. It belongs to the family of electronic devices known as ACT. There is an electronic part that is mounted in the way of Through Hole. This board has 14 pins. There is a clock edge trigger type of Positive Edgeon this device. This device is part of the FF/Latchesbase part number family. 2 circuits are used to achieve its superior flexibility. An electrical current of 5V volts is applied to it. It is recommended that the supply voltage be kept at 5Vto maximize efficiency. As a result of its output current of 24mA, it is very flexible in terms of design. The number of input lines is 4.
SN74ACT74N Features
Tube package
74ACT series
14 pins
5V power supplies
SN74ACT74N Applications
There are a lot of Texas Instruments SN74ACT74N Flip Flops applications.
- Data transfer
- Clock pulse
- Frequency Dividers
- Shift Registers
- Test & Measurement
- Reduced system switching noise
- Parallel data storage
- Counters
- High Performance Logic for test systems
- Patented noise
