74VHC574FT Overview
The package is in the form of 20-TSSOP (0.173, 4.40mm Width). The Tape & Reel (TR)package contains it. Tri-State, Non-Invertedis the output configured for it. The trigger it is configured with uses Positive Edge. This electronic part is mounted in the way of Surface Mount. A voltage of 2V~5.5Vis used as the supply voltage. A temperature of -40°C~85°C TAis considered to be the operating temperature. This electronic flip flop is of type D-Type. JK flip flop belongs to the 74VHCseries of FPGAs. In order for it to function properly, its output frequency should not exceed 115MHz. There are 1 elements in it. During its operation, it consumes 4μA quiescent energy. A total of 20 terminations have been made. A voltage of 5V is used as the power supply for this D latch. A 4pFfarad input capacitance is provided by this T flip flop. This D flip flop belongs to the family of AHC/VHC/H/U/V. There is a 5.5Vmaximum supply voltage (Vsup). Normally, the supply voltage (Vsup) should be kept above 2V. There are 2 ports embedded in the flip flops.
74VHC574FT Features
Tape & Reel (TR) package
74VHC series
74VHC574FT Applications
There are a lot of Toshiba Semiconductor and Storage 74VHC574FT Flip Flops applications.
- Clock pulse
- Frequency Dividers
- Shift Registers
- Automotive
- Balanced 24 mA output drivers
- Synchronous counter
- Buffered Clock
- Balanced Propagation Delays
- Frequency Divider circuits
- Reduced system switching noise
