CD74HC107M96 Overview
The package is in the form of 14-SOIC (0.154, 3.90mm Width). Package Tape & Reel (TR)embeds it. It is configured with Differentialas an output. It is configured with a trigger that uses a value of Negative Edge. There is an electronic component mounted in the way of Surface Mount. Powered by a 2V~6Vvolt supply, it operates as follows. It is operating at a temperature of -55°C~125°C TA. It belongs to the type JK Typeof flip flops. In FPGA terms, D flip flop is a type of 74HCseries FPGA. You should not exceed 60MHzin the output frequency of the device. A total of 14 terminations have been made. If you search by 74HC107, you will find similar parts. It is powered by a voltage of 4.5V . JK flip flop input capacitance is 10pF farads. A device of this type belongs to the family of HC/UH. It is mounted by the way of Surface Mount. This board has 14 pins. This device exhibits a clock edge trigger type of Negative Edge. It is part of the FF/Latchesbase part number family. Vsup reaches 6V, the maximal supply voltage. It is imperative that the supply voltage (Vsup) is maintained above 2Vin order to ensure normal operation. Its superior flexibility is attributed to its use of 2 circuits. Considering the reliability of this T flip flop, it is well suited for TR. The 5.2mA output current allows it to be designed with the greatest amount of flexibility. It consumes a total of 4μA quiescent current at any given time.
CD74HC107M96 Features
Tape & Reel (TR) package
74HC series
14 pins
CD74HC107M96 Applications
There are a lot of Texas Instruments CD74HC107M96 Flip Flops applications.
- Functionally equivalent to the MC10/100EL29
- QML qualified product
- Matched Rise and Fall
- Cold spare funcion
- Circuit Design
- Parallel data storage
- Differential Individual
- 2 – Bit synchronous counter
- Power down protection
- Instrumentation
