V62/07633-01XE Overview
It is packaged in an SOT-23-case that protects the operational amplifiers from damage. An op amp of this type is a OPERATIONAL AMPLIFIER-type. As far as the packaging is concerned, buffer op amp is delivered in a Tape and Reel case. It is estimated that there will be at least 5 terminations this year. A total of 5 pins are attached to buffer op amp. As a reminder, this buffer op amp should be powered by 5V battery and that the battery should be inserted in the amplifier. A type of Operational Amplifier op amp ic can be identified by the fact that this is a type of Operational Amplifier device. In total, the buffer amplifier consists of 5 pins. Op amp ic rates 10μV for input offset voltage. There should be no change in the voltage gain at 130dB. There are a total of 1 channels available on the op amps. This instrumentation amplifier cannot operate below -55°C degrees Celsius. You should only use op amp buffer at temperatures that are no higher than 125°C. An buffer amplifier is packed in a TR-shape according to the design. It is important to keep in mind that the power supply voltage of this electric component is below 5.5V, which is suitable. Keeping the linear amplifier's supply voltage above 1.8V is recommended.
V62/07633-01XE Features
5 Pins
supply voltage of 5V
130dB voltage gain
V62/07633-01XE Applications
There are a lot of Texas Instruments
V62/07633-01XE Instrumentational OP Amps applications.
- Logarithmic operation circuits
- Exponential operation circuits
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
- Information processing
- Weak signal detection
- Signal amplification
- Signal filtering
