THS4304DBVTG4 Overview
A SOT-23 case is used to package the op amp. OPERATIONAL AMPLIFIER-type instrumentation amplifiers are used in this application. The case in which buffer amplifier is delivered is called a Tape and Reel case. It is estimated that there will be 5 terminations in the next few months. There are a total of 5 pins on this op amp. It is important to remember that this op amp should be operated at a voltage of 3V volts. It should be noted that this op amp is a type of Operational Amplifier device. There are 5 pins on this chip. In terms of the input offset voltage, instrumentation amplifier rates at 4mV. An 18mA volt supply current is needed for this linear amplifier to operate. There should be no change in the voltage gain. In order for op amp to function properly, the temperature should not be lower than -40°C degrees Celsius. Instrumentation amplifier should only be used at temperatures up to 85°C. There are a total of 1 elements in this linear amplifier. The operating supply voltage of the buffer op amp is rated at 3V. The instrumentation amplifier is packed in the form of TR. I would like to point out that this electrical component is capable of working from a voltage below 5V as far as the power supply is concerned. As a general rule, it is advisable to keep the op amp's supply voltage above 2.7V at all times. The dual supply voltage of 2.5V should be used for the conduct of this electronic component.
THS4304DBVTG4 Features
5 Pins
supply voltage of 3V
65dB voltage gain
THS4304DBVTG4 Applications
There are a lot of Texas Instruments
THS4304DBVTG4 Instrumentational OP Amps applications.
- Addition operation circuits
- Subtraction operation circuits
- single/dual op amp sum and difference circuits
- Integrator circuits
- Differentiator circuits
- Logarithmic operation circuits
- Exponential operation circuits
- Multiplication circuits
- Division circuits
- Precision measurement
