V62/04651-01UE Overview
It is packaged in an D-case that protects the operational amplifiers from damage. An op amp of this type is a OPERATIONAL AMPLIFIER-type. As far as the packaging is concerned, buffer op amp is delivered in a Tape & Reel case. It is estimated that there will be at least 8 terminations this year. A total of 8 pins are attached to buffer op amp. As a reminder, this buffer op amp should be powered by 3V battery and that the battery should be inserted in the amplifier. A type of Operational Amplifier op amp ic can be identified by the fact that this is a type of Operational Amplifier device. In total, the buffer amplifier consists of 8 pins. Op amp ic rates 1.5mV for input offset voltage. Maintain 124.61dB as the voltage gain. There are a total of 2 channels available on the op amps. This instrumentation amplifier cannot operate below -40°C degrees Celsius. You should only use instrumentation amplifier at temperatures that are no higher than 125°C. The operating supply voltage of the buffer op amp is rated at 8V. It is important to keep in mind that the power supply voltage of this electric component is below 16V, which is suitable. Keeping the linear amplifier's supply voltage above 2.7V is recommended. In order to conduct this part, you will need to provide dual supply voltages of 8V volts.
V62/04651-01UE Features
8 Pins
supply voltage of 3V
124.61dB voltage gain
V62/04651-01UE Applications
There are a lot of Texas Instruments
V62/04651-01UE Instrumentational OP Amps applications.
- Logarithmic operation circuits
- Exponential operation circuits
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
- Information processing
- Weak signal detection
- Signal amplification
- Signal filtering
