AD8317ACPZ-WP Overview
In the package, you will find a LFCSP EP-case to contain the op amp ic. A total of 8 terminations have been reported in the past few weeks. In this case, there are 8 pins on the board. I would like you to keep in mind that this buffer amplifier needs to be run at a voltage of 5V. In more specific terms, this linear amplifier can be categoriAnalog Computational Functionsed as a Analog Computational Functions-type device. An 8-pin op amp ic is included in the package. It is possible to operate this buffer amplifier from a supply current of 22mA . Op amp ic has 1 channels. It is recommended that the temperature of this op amp ic should not fall below -40°C degrees Fahrenheit at any time. It should only be used at temperatures up above 85°C. It is possible to count 3 elements on this buffer amplifier. The operating supply voltage of the buffer op amp is rated at 5V. With regard tp supply voltage, op amp is used under 5.5V. To keep the buffer amps' supply voltage higher than 3V. There is an 22mA quiescent current running through op amp ic. 40kOhm is the range in which the op amp resistance should lie. In this linear amplifier, there is also an analog IC called a LOG OR ANTILOG AMPLIFIER.
AD8317ACPZ-WP Features
8 Pins
supply voltage of 5V
Resistance of 40kOhm
AD8317ACPZ-WP Applications
There are a lot of Analog Devices, Inc. AD8317ACPZ-WP Instrumentational OP Amps applications.
- Division circuits
- Inverse/same-phase proportional circuit
- single/dual op amp sum and difference circuits
- Video data acquisition
- Navigation
- Micro signal measurement
- Addition operation circuits
- Signal operation
- earphone
- Signal transformation
