UCC5681PW24G4 Overview
Termination with a 24 device, which matches the transmission line's characteristic impedance, is considered a 24 termination. Because of its low package cost, the TSSOP is widely used in the electronic industry. You can find related parts by using Base Part Number UCC5681. There are a number of 24 pins included for specific applications. In terms of 9 signal lines, these are lines devoted exclusively to the transmission of signals or intelligence, either public or private. For high efficiency, it is recommended that the supply voltage is maintained at 3.3V. There is a place for it in Subcategory Bus Terminators. Power Supplies are needed to operate 3/5V Power Supplies. Here is the resistance of this electrical device: 105Ohm (Ω). To fully perform its functions, 5.25V needs supply current. In operation, it should produce a higher temperature than 0°C. Consequently, maximum reliability is achieved by operating at the maximum operating temperature 70°C.
UCC5681PW24G4 Features
24 terminations
UCC5681 family
24 pin count
9 signal lines
3/5V power supplies
UCC5681PW24G4 Applications
There are a lot of Texas Instruments
UCC5681PW24G4 Signal Terminators applications.
- Programmable logic controller
- Remote input module
- Data Networking
- PCI Cards
- Telecommunication Equipment
- Data Routers
- Data Switches
- Programmable logic controller and remote input modules
- High speed protected termination for digital input with serialized SPI output
- IEC61131-2 type 1, 2 and 3
