UCC5672PWPG4 Overview
A transmission line may also have 28 terminations, which are made using devices matched to its characteristic impedance. Because of the low cost of its packages, the TSSOP is well known in the electronic industry. A specific purpose is served by the 28 pins. It can be a public or a private signal or communication line and its sole purpose is for transmission of signals and intelligence. It is important to maintain the supply voltage at 3.3V in order to achieve high efficiency. A Surface Mount-mount is on it. A subcategory Bus Terminators is appropriate for it. Contacts with 28 pins are used in computers and other communications devices. It is necessary to use 3/5V Power Supplies to operate this system. This electrical device has a resistance of 105Ohm. Its ability to operate at voltages as low as 35mA makes it a great choice for a wide range of applications. A voltage of 2.7V serves as the minimal supply voltage for the system. A maximal 5.25V indicates maximum voltage. A temperature that is warmer than 0°C should result from its operation. Consequently, to ensure maximum reliability, it operates at a maximum operating temperature of 70°C. In order to operate, it needs a maximum current of 35mA.
UCC5672PWPG4 Features
28 terminations
28 pin count
9 signal lines
28 pins
3/5V power supplies
UCC5672PWPG4 Applications
There are a lot of Texas Instruments
UCC5672PWPG4 Signal Terminators applications.
- Data Routers
- Data Switches
- Programmable logic controller and remote input modules
- High speed protected termination for digital input with serialized SPI output
- IEC61131-2 type 1, 2 and 3
- ESD protection and termination of USB downstream ports downstream ports
- Desktop PCs
- Notebooks
- Set-top boxes
- USB hubs
