UCC2818NG4 Overview
Currently, it is available as a PDIP package.As well as the POWER FACTOR CONTROLLER integrated circuit, this part contains other types of integrated circuits as well.The gadget has a number of 16 terminals on the back of it.This component retains the pin number at 16 even though the pin number has been changed.There is a switching frequency of 115kHz which is the frequency of switching.There are 16 pins in this board, which make up its sum.There is a minimum input voltage of 10.3V that can make it function properly.I guess you could say it's a subclass of Switching Regulator or Controllers in a way.15V is the maximum input voltage (Max) of this device.As long as the frequency is kept constant at 250kHz, it is possible to continue to operate with good accuracy.As a result, it works in a 1.2A output current at the maximumThere is no maximum supply temperature that it can work with, but it should not go below 20mA.A temperature of -40°C should be higher than the temperature of W when it is operating.In this case, the maximum operating temperature is 85°C at this point.You can only use it with a voltage supply of 17V volts.For the 12V-volt supply voltage, there is only one that will work for it: that is, 12V volts will work.
UCC2818NG4 Features
UCC2818NG4 Applications
There are a lot of Texas Instruments
UCC2818NG4 PFC PMICs applications.
- Switching regulator
- Multiple-power supply system
- Digital audio player
- Digital TV
- Smartcard
- Industrial equipment
- DVD and CD-ROM drive
- Quick charge protocols
- Measurement and control euipment
- Aging system
