UC2845ADTRG4 Overview
It comes in the SOIC package, which makes switching controller suitable for most applications. It is sufficient to generate 1 outputs with this dc motor controller. Packaging for the pmic consists of Tape & Reel (TR) solid enclosures. The switching controller can be switched at 500kHz. The switch converters are connected to an analog IC with a SWITCHING CONTROLLER output. There are a DUAL terminal on the switching converters. Different dc switching's functions can be applied to 14 terminations. Some of the control techniques adapted by these dc dc converter ics include PULSE WIDTH MODULATION. DC switcher's voltage input of 15V. In total, switching converter has 14 pins. Power-up and power-down reliability is ensured voltage regulator dc to dc by setting the maximum duty cycle to 50 %. 450kHz is the frequency of the switching controller. The temperature should be at least -40°C. DC regulator should run at a temperature 85°C higher than 85°C. As a whole, there are 1 function(s) in the switch converters. Designing voltage regulators switchings with 14 pins is one of the most important aspects of the process. It is possible for the controller to switch at a frequency of 500kHz. 25V is the nominal working voltage. A 200mA input switching controller would benefit from it. When it is working normally, it outputs a value of 15V. There must be a voltage supply of 11V volts. A maximum supply voltage of 30V is specified.
UC2845ADTRG4 Features
Switching Frequency: 500kHz
PULSE WIDTH MODULATION
Max Duty Cycle: 50 %
Frequency: 450kHz
UC2845ADTRG4 Applications
There are a lot of Texas Instruments
UC2845ADTRG4 DC to DC converter applications.
- Linear guide
- Ball screw pair
- Computer application technology
- Network technology
- Automation technology
- CMM
- Various precision measuring instruments
- Various precision measuring detectors
- Flaw detection equipment
- Balance equipment
