Name: UC2824DWTR
Brand: Texas Instruments
SKU: UC2824DWTR
Price: 4.97000 USD
Availability: InStock

Technical Specifications

Parameter Name	Value
Type	Parameter
Mounting Type	Surface Mount
Package / Case	16-SOIC (0.295, 7.50mm Width)
Surface Mount	YES
Number of Pins	16
Weight	473.692182mg
Operating Temperature	-40°C~85°C TA
Packaging	Tape & Reel (TR)
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	2 (1 Year)
Number of Terminations	16
ECCN Code	EAR99
Additional Feature	CURRENT MODE OPERATION ALSO POSSIBLE
Subcategory	Switching Regulator or Controllers
Technology	BIPOLAR
Terminal Position	DUAL
Terminal Form	GULL WING
Frequency	1MHz
Base Part Number	UC2824
Function	Step-Up
Number of Outputs	1
Output Voltage	13V
Output Type	Transistor Driver
Input Voltage-Nom	15V
Analog IC - Other Type	SWITCHING CONTROLLER
Output Configuration	Positive
Output Current	200mA
Voltage - Supply (Vcc/Vdd)	8.4V~30V
Control Features	Current Limit, Enable, Frequency Control, Ramp, Soft Start
Input Voltage (Min)	8.8V
Topology	Boost
Control Mode	VOLTAGE-MODE
Frequency - Switching	340kHz~460kHz
Input Voltage (Max)	30V
Control Technique	PULSE WIDTH MODULATION
Synchronous Rectifier	No
Switcher Configuration	PUSH-PULL
Duty Cycle (Max)	80%
Height Seated (Max)	2.65mm
Width	7.5mm
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

UC2824DWTR Product Details

UC2824DWTR Overview

With a 16-SOIC (0.295, 7.50mm Width) package, the switching controller is suitable for a wide range of applications. For outputs of 1, this dc motor controller is suitable. Tape & Reel (TR) is the solid enclosure in which PMIC is packaged. The system can process Transistor Driver dc switching's outputs (s). 8.4V~30V is the supply voltage and the operating voltage of the dc control. Workable in an dc switcher where -40°C~85°C TA is the -40°C~85°C TArm. In this switching controller, the switch can be set to 340kHz~460kHz. As it has a Surface Mount value, it can be used for general dc dc regulator. DCDC regulator is controlled efficiently by Current Limit, Enable, Frequency Control, Ramp, Soft Start. Switch converters are connected to ICs with SWITCHING CONTROLLER analog outputs. Switching converters are designed with the terminal (s) at position DUAL . The 16 terminations can be used for a wide range of dc switching. A few of the control techniques these dc dc converter ics adapt include PULSE WIDTH MODULATION. The nominal DC switcher's voltage input is 15V. In addition to "UC2824", there are other relevant dc to dc converter ics you can find. 16 pins are on switching converter. Particularly, switching converter is a type of Switching Regulator or Controllers. Input voltage of dc dc voltage regulator must be 8.8V. A 13V voltage of DC regulator was detected in the test statistics. This dc to dc regulator accepts only 30V input voltage at most. The dc dc regulator's usual output current is 200mA, which should be noted down when you start a project. 1MHz is the frequency of the switching controller. In order to satisfy the need, DC to DC voltage regulator has a value of CURRENT MODE OPERATION ALSO POSSIBLE.

UC2824DWTR Features

Transistor Driver Outputs
Switching Frequency: 340kHz~460kHz
Current Limit, Enable, Frequency Control, Ramp, Soft Start
PULSE WIDTH MODULATION
Frequency: 1MHz
CURRENT MODE OPERATION ALSO POSSIBLE