Name: UC2525ADW
Brand: Texas Instruments
SKU: UC2525ADW
Price: 2.75000 USD
Availability: InStock

Technical Specifications

Parameter Name	Value
Type	Parameter
Factory Lead Time	6 Weeks
Lifecycle Status	ACTIVE (Last Updated: 4 days ago)
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	16-SOIC (0.295, 7.50mm Width)
Number of Pins	16
Weight	473.692182mg
Operating Temperature	-25°C~85°C TA
Packaging	Tube
Tolerance	1%
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	2 (1 Year)
Number of Terminations	16
ECCN Code	EAR99
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory	Switching Regulator or Controllers
Technology	BIPOLAR
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Frequency	450kHz
Base Part Number	UC2525
Function	Step-Up, Step-Up/Step-Down
Number of Outputs	2
Output Voltage	18V
Output Type	Transistor Driver
Input Voltage-Nom	20V
Analog IC - Other Type	SWITCHING CONTROLLER
Output Configuration	Positive
Output Current	100mA
Voltage - Supply (Vcc/Vdd)	8V~35V
Quiescent Current	14mA
Control Features	Enable, Frequency Control, Soft Start
Topology	Boost, Flyback, Forward Converter, Full-Bridge, Half-Bridge, Push-Pull
Control Mode	VOLTAGE-MODE
Frequency - Switching	100Hz~400kHz
Control Technique	PULSE WIDTH MODULATION
Reference Voltage	5.1V
Rise Time	100ns
Synchronous Rectifier	Yes
Fall Time (Typ)	50 ns
Nominal Input Voltage	35V
Max Duty Cycle	49 %
Output Phases	1
Height	2.65mm
Length	10.3mm
Width	7.5mm
Thickness	2.35mm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

UC2525ADW Product Details

UC2525ADW Overview

Capsuled in the 16-SOIC (0.295, 7.50mm Width) package, the switching controller can be used for a wide range of applications. There is enough capacity in the dc motor controller to generate the output for the 2 input. PMIC packaging is solid with a Tube enclosure. A total of Transistor Driver dc switching's outputs can be handled by it. Voltages 8V~35V are the dc control's supply voltage and operating voltage, respectively. Work well in dc switchers with a -25°C~85°C TA. Using this switching controller, it is possible to switch at 100Hz~400kHz. A generalization of dc dc regulator can be made using Surface Mount. To ensure efficient switching, this dcdc regulator features a Enable, Frequency Control, Soft Start. An analog IC with the SWITCHING CONTROLLER signal is connected to the switch converters. A switching converters's terminal (s) sits at the DUAL position. A variety of dc switching's functions can be performed on 16 terminations. The control methods that these dc dc converter ics use include PULSE WIDTH MODULATION. DC switcher's voltage input is 20V. You can find other relevant dc to dc converter ics by searching "UC2525". Pins number 16 of switching converter in total. Specially, switching converter corresponds to type Switching Regulator or Controllers. Test statistics indicate DC regulator outputs 18V voltage. In most cases, the dc dc regulator's output current is 100mA. This information should be noted when you begin working with the component. As a result of this, the maximum duty cycle of the voltage regulator dc to dc must remain 49 % during power-up and power-down. The Surface Mount makes DC switcher suitable for most applications and prototypes. Switching controller operates at 450kHz Hz. A dc switching in a dormant state uses 14mA. It is possible to set the input voltage as 35V for nominal working statuses.

UC2525ADW Features

Transistor Driver Outputs
Switching Frequency: 100Hz~400kHz
Enable, Frequency Control, Soft Start
PULSE WIDTH MODULATION
Max Duty Cycle: 49 %
Frequency: 450kHz