UCC2807D-3 Overview
In the 8-SOIC (0.154, 3.90mm Width) package, the switching controller meets most application requirements. There is sufficient capacity to generate switching controller for outputs 1. There is a Tube solid enclosure around the pmic. With this function, you can deal with Transistor Driver dc switching's outputs (s). DC control operates at 4.1V~13.5V volts and has 4.1V~13.5V supply voltage. Suitable for working in an dc switcher that has a -40°C~85°C TA. It can switch at 202kHz. As it has a Surface Mount value, it can be used for general dc dc regulator. A SWITCHING CONTROLLER analog integrated circuit is connected to the switch converters. DUAL are the position of the terminal of the switching converters. Various 8 terminations. This dc dc converter ic uses a variety of control techniques, including PULSE WIDTH MODULATION. There is a DC switcher's nominal voltage of 10V. In addition to "UCC2807", there are other relevant dc to dc converter ics you can find. There are 8 pins on switching converter. Specifically, switching converter falls under the Switching Regulator or Controllers category. It is recommended that the dc dc voltage regulator's minimum input voltage be 4.3V. A starting point for a project is to note down the dc dc regulator's usual output current, which is 1A. Voltage regulator dc to dc is designed to operate at 78 % duty cycle during power-ups and power-downs to ensure reliability. Because of DC switcher's Surface Mount, it is suitable for most prototype designs and applications. A frequency of 1MHz is set for the switching controller. This voltage controller requires a supply voltage of 10V.
UCC2807D-3 Features
Transistor Driver Outputs
Switching Frequency: 202kHz
PULSE WIDTH MODULATION
Max Duty Cycle: 78 %
Frequency: 1MHz
UCC2807D-3 Applications
There are a lot of Texas Instruments
UCC2807D-3 DC to DC converter applications.
- Network technology
- Automation technology
- CMM
- Various precision measuring instruments
- Various precision measuring detectors
- Flaw detection equipment
- Balance equipment
- Industrial robots
- Industrial controllers
- Die casting equipment
