TS5A623157DGSR Overview
Shipping overseas is convenient with the electronic component packed in 10-TFSOP, 10-MSOP (0.118, 3.00mm Width). A high level of reliability can be achieved through the use of an advanced packaging method Tape & Reel (TR). It is mounted in the position Surface Mount. The ratio between the number of multiplexer and demultiplexer circuits is 2:1. Operation at a temperature around -40°C~85°C TA. Total terminations are 10. Due to its 2 channels, the electrical component produces high-quality output. Turning on and running the electrical part should be easy with a 1.8V voltage supply. There are 10 pins injected into the electronic part body. A SPDT switching circuit is used to build these analog multiplexers. TS5A623157 can be used to search for analog multiplexer variants. The internal resistance of this digital multiplexer is 10Ohm. Datasheets for 10 pin functions are available upon request. It is a typical Multiplexer or Switches analog multiplexer. It is normally recommended that users do not supply the multiplexer with voltages higher than 5.5V. The analog switch ic is of the Single supply type and is cost-effective. There should be 1.65V voltage fed to the electrical part below 1.65V. This digital switch can be operated with a current of 10nA. Analogue multiplexers require a 1.65V~5.5V voltage to drain from a single voltage supply. When the digital multiplexer is charged above 150nA, damage can occur. A 371MHz-bandwidth can be used for data transfer. The analog switch ics includes 4 outputs.
TS5A623157DGSR Features
2 Channels
Switch Circuit: SPDT
10nA Supply Current
Bandwidth: 371MHz
TS5A623157DGSR Applications
There are a lot of Texas Instruments TS5A623157DGSR Analog Switches & Multiplexers ICs applications.
- Central office
- 65 V DACs
- Communication systems
- Modems
- Digital cross connects (DSX-1)
- Cable Telephony – NIU, Set-Top Box, Home Side Box
- Channel Banks
- Public switching systems
- Avionics test equipment
- Remote Powered Equipment
