Name: MAX4800ACCM+
Brand: Maxim Integrated
SKU: MAX4800ACCM+
Price: 38.94000 USD
Availability: InStock

new

MAX4800ACCM+

Manufacturer part number:MAX4800ACCM+

Manufacturer:Maxim Integrated

Description:5μs, 5μs SPST - NO 38Ohm QUAD Analog Switches MAX4800 48 Pins 2μA 5V 48-LQFP

Case Package:SOT-23

Datasheet:MAX4800ACCM+ Datasheet PDF

RoHs Status:non-compliant

Parameter Name	Value
Type	Parameter
Factory Lead Time	6 Weeks
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	48-LQFP
Number of Pins	48
Weight	181.692094mg
Operating Temperature	0°C~70°C TA
Packaging	Tray
Published	2008
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	48
Termination	SMD/SMT
ECCN Code	EAR99
Resistance	25Ohm
Subcategory	Multiplexer or Switches
Max Power Dissipation	1.818W
Technology	BCDMOS
Terminal Position	QUAD
Terminal Form	GULL WING
Number of Functions	1
Supply Voltage	5V
Terminal Pitch	0.5mm
Base Part Number	MAX4800
Output	SEPARATE OUTPUT
Pin Count	48
Power Supplies	3/5V
Number of Channels	1
Interface	SPI, Serial
Number of Circuits	8
Max Supply Voltage	6V
Min Supply Voltage	2.7V
Max Supply Current	3μA
Throw Configuration	SPST
Turn On Delay Time	5 μs
Supply Type	Dual, Single
Turn-Off Delay Time	5 μs
Max Dual Supply Voltage	185V
On-State Resistance (Max)	38Ohm
Min Dual Supply Voltage	40V
Dual Supply Voltage	100V
Multiplexer/Demultiplexer Circuit	1:1
Off-state Isolation-Nom	33 dB
Current - Leakage (IS(off)) (Max)	2μA
Channel Capacitance (CS(off), CD(off))	18pF
On-state Resistance Match-Nom	1.9Ohm
Switch Circuit	SPST - NO
Switch Time (Ton, Toff) (Max)	5μs, 5μs
Channel-to-Channel Matching (ΔRon)	1.9 Ω
Crosstalk	-80dB @ 5MHz
Switch-on Time-Max	5000ns
Switch-off Time-Max	5000ns
Voltage - Supply, Single (V+)	2.7V~6V
Normal Position	NO
Height Seated (Max)	1.6mm
Length	7mm
Width	7mm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant

MAX4800ACCM+ Product Details

MAX4800ACCM+ Overview

As the electronic part is packed in 48-LQFP, international shipping is convenient. A high level of reliability can be achieved through the use of an advanced packaging method Tray. The multiplexer is located in Surface Mount. 1:1 is the number of circuits in the multiplexer and demultiplexer. Operating temperature extended to 0°C~70°C TA. Total terminations are 48. The electronic part provides high-quality output because it has 1 channels. Powered by a 5V voltage supply, the electrical part should be switched on and run. The electrical component body receives 48 pins. Circuits based on SPST - NO switching are used to construct these analog switch ics. There are 8 circuits in this switch device. Try searching with MAX4800 to find analog multiplexer variants. An switch multiplexer with 25Ohm internal resistance has a value of 25Ohm. Datasheets for 48 pin functions are available upon request. The analogue multiplexer in this example is a typical Multiplexer or Switches. Multiplexers should not be powered above 6V in normal situations. The analog switch ic is of the Dual, Single supply type and is cost-effective. The lowest voltage the electronic part should receive is 2.7V. Using a single voltage supply, this switch device consumes 2.7V~6V volts. When the digital multiplexer is charged above 3μA, damage can occur. Despite this switch device's dual supply capability, its voltage should not exceed 185V. It is recommended that you attach at least 40V to your dual power supply. SEPARATE OUTPUT outputs are utilized by this digital multiplexer.