Name: TS5A23166YZPR
Brand: Texas Instruments
SKU: TS5A23166YZPR
Price: 0.92000 USD
Availability: InStock

new-10%

TS5A23166YZPR

Manufacturer part number:TS5A23166YZPR

Manufacturer:Texas Instruments

Description:7.5ns, 11ns SPST - NO 900mOhm BOTTOM Analog Switches BREAK-BEFORE-MAKE TS5A23166 8 Pins 20nA 1.8V 8-XFBGA, DSBGA

Case Package:SOT-23

Datasheet:TS5A23166YZPR Datasheet PDF

RoHs Status:non-compliant

Parameter Name	Value
Type	Parameter
Factory Lead Time	6 Weeks
Lifecycle Status	ACTIVE (Last Updated: 5 days ago)
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	8-XFBGA, DSBGA
Number of Pins	8
Weight	2.296311mg
Operating Temperature	-40°C~85°C TA
Packaging	Tape & Reel (TR)
JESD-609 Code	e1
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
ECCN Code	EAR99
Resistance	900mOhm
Terminal Finish	Tin/Silver/Copper (Sn/Ag/Cu)
Subcategory	Multiplexer or Switches
Terminal Position	BOTTOM
Terminal Form	BALL
Peak Reflow Temperature (Cel)	260
Number of Functions	2
Supply Voltage	1.8V
Terminal Pitch	0.5mm
Base Part Number	TS5A23166
Output	SEPARATE OUTPUT
Pin Count	8
Number of Channels	2
Max Supply Voltage	5.5V
Min Supply Voltage	1.65V
Operating Supply Current	10nA
Nominal Supply Current	10nA
Max Supply Current	100nA
Throw Configuration	SPST
Turn On Delay Time	18 ns
Supply Type	Single
Bandwidth	150MHz
Turn-Off Delay Time	15.5 ns
On-State Resistance (Max)	900mOhm
Multiplexer/Demultiplexer Circuit	1:1
Off-state Isolation-Nom	62 dB
Current - Leakage (IS(off)) (Max)	20nA
Channel Capacitance (CS(off), CD(off))	19pF 18pF
On-state Resistance Match-Nom	0.04Ohm
Switch Circuit	SPST - NO
Switch Time (Ton, Toff) (Max)	7.5ns, 11ns
Charge Injection	6pC
Channel-to-Channel Matching (ΔRon)	40m Ω
Crosstalk	-85dB @ 1MHz
Switching	BREAK-BEFORE-MAKE
Voltage - Supply, Single (V+)	1.65V~5.5V
Height	500μm
Length	1.25mm
Width	2.25mm
Thickness	310μm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

TS5A23166YZPR Product Details

TS5A23166YZPR Overview

Presented in 8-XFBGA, DSBGA, this electrical component is convenient for overseas shipping. This high-reliability packaging method uses advanced packaging methods Tape & Reel (TR). It is mounted in the position Surface Mount. There is 1:1 ratio between the number of multiplexers and demultiplexers. An extended operating temperature of -40°C~85°C TA degrees Celsius. In total, there are 8 terminations. A 2 channel electronic part produces high-quality output. Turning on and running the electrical part should be easy with a 1.8V voltage supply. As part of the design of the 8 series, this electronic part has been incorporated into the system. The analog switch ics are built using SPST - NO switching circuits. Try searching with TS5A23166 to find analog multiplexer variants. There is 900mOhm internal resistance in this digital multiplexer. To find out what the 8 pins do, please refer to the datasheets. There is Multiplexer or Switches analog multiplexer like this in the world. An abnormal situation would be for the switch device to be supplied with a voltage greater than 5.5V. Analogue multiplexers of the Single supply type that are cost-effective. The lowest voltage fed to the electronic component should be 1.65V. An operating current of 10nA would be sufficient for this switch device. Using only a single voltage supply, this analog switch requires 1.65V~5.5V voltage. When the digital multiplexer is charged above 100nA, damage can occur. As far as the outputs go, this switch multiplexer utilizes SEPARATE OUTPUT of them. The transfer of data can be performed over 150MHz bandwidths.